Larson Electronics 75KVA Power Distribution System - 480V to 208Y/120V 3PH - (3) 5100R9W - 75' #4 Type W Cord

Made in the USA The Larson Electronics MPD-480V.3PH-75KVA-208Y.120V-3X100A heavy-duty power transformer substation converts three phase 480VAC electrical current to three phase 208Y/120VAC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The Larson Electronics MPD-480V.3PH-75KVA-208Y.120V-3X100A portable power distribution system gives operators the ability to power their 208 volt equipment from a single system. On the primary side, operators bring 480V line-in power using 75` of #4 Type W cord. On the secondary side, operators can access three 5100R9W receptacles for 208Y/120V equipment. All receptacles are protected with weatherproof covers. Operation: A 75` #4 Type W cord brings 480V three phase power to the 100-amp 480V three phase NEMA 3R fused disconnect, which contains three 100-amp time delay fuses, and passes power to the transformer. The NEMA 3R 75KVA transformer converts three phase 480V power to three phase 208Y/120V 60Hz and passes the current to the secondary panel. The secondary side of the transformer feeds a 225-amp 208Y/120V three phase NEMA 3R main lug only panel. This secondary panel contains three 100-amp 3-pole 250V breakers protecting three 100-amp 208Y/120V 5100R9W receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking foam filled casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480V.3PH-75KVA-208Y.120V-3X100A Power Distribution System Ratings Line-In Cord: 75` #4 Type W Cord Max Primary OCP: 100A @ 480V Primary Voltage: 480VAC 3PH Max Secondary Output: 208.2A @ 208V Primary Disconnect: 480V 3PH 100A Fused @ 100A N3R UL 1640 Portable Power-Distribution Equipment Primary Protection: Time Delay Fuses, Disconnect NEMA 3R Indoor or Outdoor Use Transformer KVA: 75KVA 480V to 208Y/120V 3PH 60Hz N3R Made in the USA Secondary Voltage: 208Y/120VAC 3PH Secondary Panel: 208Y/120V 3PH 225A MLO N3R Secondary Breakers: (3) 100A 3P [250V] Secondary Outlets: (3) 100A 5100R9W [208Y/120V] Special Orders- Requirements Secondary Protection: Circuit Breakers, Weatherproof Covers Contact us for special requirements Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 10” foam filled casters Toll Free: 888-325-4448 Finish: Powdered Coated - Grey Intl: +01-903-498-3364 Dimensions: 34”-L X 40”-W X 58”-H Fax: 1-903-498-3364 Weight: 600 lbs E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*Scroll Down to Purchase