Larson Electronics 75 KVA Power Distribution System - 208V 3P 200A Camlock Primary - 480Y/277V 3P 100A Secondary

Made in the USA The Larson Electronics MPD-208V.200A-3P-75K-480Y.277V.100A-CML power distribution substation converts 208V three phase electrical current into 480Y/277V. This encapsulated power distribution cart with locking casters includes a fused 200-amp main disconnet, a 75 KVA 208V to 480Y/277V transformer, and a 100-amp main breaker enclosurer. On the 208V primary side, operators bring line-in power via four cam lock input male receptacles protected by a 200-amp 3-phase fused disconnect. On the secondary side, operators bring line-out power via five cam lock receptables protected by a 3-phase 100-amp main breaker. 75KVA Power Distribution Cart 480-120/208Y: 1-Power Cart Large Heavy Duty Tubular Construction 4 Wheel - Powder Coat (Default gloss blue, custom available) 4-Cam Locks input male receptacles with flip lid covers NEMA 3R 1-200A 3 phase primary disconnect 75 KVA 208V Delta to 480Y/277V 3-Phase Transformer NEMA 3R 1-480Y/277V 3-Phase 100A main breaker enclosure 5-Cam Locks output female receptacles with flip lid covers NEMA 3R Cam Locks Cam Locks Disconnect Cam Lock Fuse Click Images to Enlarge Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, 8" locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Units are available up to 150kva and can be equipped with skids or trailer mounted. Dimensions: 34" long by 44" deep by 58" tall Weight: 650 pounds Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These power transformers are popularly used in applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-208V.200A-3P-75K-480Y.277V.100A-CML Portable Power Transformer Ratings American Made UL 1640 Portable Power-Distribution Equipment NEMA 3R Indoor or Outdoor Use Made in the USA Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase