Larson Electronics 7 Watt Compact Aluminum LED Fixture for Hazardous Area Location Lighting - No Bracket - 25' Cable

Buy American Compliant The Larson Electronics HAL-7W-LED-NB-25C is a low voltage hazardous area lighting solution approved for Class 1 Division 2 Environments and 1598 compliant for use in wet locations. This powerful LED light produces 604 lumens, operates from 12 or 24 VDC, and is available in a variety of configurations to allow tailoring to the specific requirements of various applications. The HAL-7W-LED-NB-25C is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 25 feet of connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and durability and is rated IP66 for ingress protection against direct exposure to high pressure water spray. The HAL-7W-LED-NB-25C is available in a 30 degree spotlight beam configuration for distance and a 120 degree configuration for wide area illumination, and a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps. Durability/Mounting: The HAL-7W-LED-NB-25C hazardous location LED light is constructed of machined aluminum for high strength and durability. The housing is IP66 rated, providing protection against intrusion into the housing from oils and water directly sprayed on the housing at high pressure. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wet conditions are commonly encountered. The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. The entire assembly weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where space is limited and a heavy fixture cannot be installed due to lack of support. Wiring/Power: These explosion proof LED lights are equipped with 25 feet of cord containing a standard two wire (White+ Black-) connecting configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC. Versatility: The HAL-7W-LED-NB-25C is ETL approved for Class 1 Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof rating ensuring protection against ingress from oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where wet conditions are commonly encountered. These lights are also available in a 30 degree spotlight configuration for long beam length or 120 degree flood configuration for wide area coverage. Specifications / Additional Information HAL-7W-LED-NB-25C Explosion Proof LED ETL Listed Lamp Type: LED Class 1 Division 2 Groups A,B,C,D Dimensions: Lamp 3.47" Diam"- 4.50"-Depth 5.29" Height- w Bracket CSA 22.2 No. 250.0 Weight: 2.3 lb | 1.04 k g UL 1598 Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC IP66 Ingress Protection Voltage: 12-24 VDC T3 Temperature Rating Lumens: 604 - Scoptic Lumens: 1293 Lamp Life Expectancy: 100,000 Hours CRI: 75 Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC Light Color: 6500K Special Orders- Requirements Beam Type: 30¡ Spot or 120¡ Flood Contact us for special requirements Mounting: N/A Toll Free: 1-800-369-6671 Temp Range: -40¡C – +85¡C Wiring: 25 Ft Lead | White: + Black: - E-mail:[email protected] Scroll Down to Purchase-