Larson Electronics 7.5 KVA Temporary Power Distribution - 208V to 480V 3PH - Primary and Secondary Disconnects - NEMA 3R MGL-7.5KVA-208.3P-1X480.10A

This unit is Made In USA - Manufactured in Texas

The Larson Electronics MGL-7.5KVA-208.3P-1X480.10A temporary power distribution system converts three-phase 208V AC electrical current into three-phase 480V AC. This unit provides operators the ability to safely tap into and distribute 208V AC power from a variety of sources including generators and direct grid power.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

Portable Power Distribution Purpose and Use
The MGL-7.5KVA-208.3P-1X480.10A temporary power distribution system gives operators the ability to power their 480 volt equipment from a single system. On the primary side, operators connect 208 volt line-in power via a customer-provided cord. On the secondary side, operators are provided access to a disconnect for 480V equipment.

Operation: A customer provided line-in cord brings 208V AC power to the NEMA 3R 30-amp, three-phase 208V primary disconnect, which contains three 30-amp time delay fuses, and passes power through to the transformer. The NEMA 3R 7.5 KVA transformer converts 208V to three-phase 480V 60Hz and passes the current to the secondary side of the system. The secondary side of the transformer feeds a NEMA 3R 30-amp, three-phase 480V disconnect. This secondary disconnect contains three 10-amp time delay fuses.

Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style, frame resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks.

This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA, and can be equipped with skids or trailer mounted.

Certification: All units are built in accordance to NFPA 70 (National Electric Code). All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.

Custom Built Systems Available: Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements.