Larson Electronics 6W High Output LED Light - (6) 1W LEDs -Waterproof - DT04-2P Female Deutsch Connector - Shatterproof

The LEDWP-50-DT from Larson Electronics is an LED Wall Pack Light that offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen units. This 6 watt LED light produces illumination comparable to a 50-75 watt halogen light without the high heat, fragile construction, or high energy costs of incandescent lighting. The LEDWP-50-DT makes a great replacement light head for people who already have mounting solutions in place and features a DT04-2P 2-pin female deutsch connector for easy wiring.The LEDWP-50-DT is a 6 watt LED wall pack light from Larson Electronics that produces a light beam that is well spread without any of the irregularities or dark spots associated with typical halogen lighting. The beam from this compact LED fixture will illuminate an area nearly twice the distance as a standard 50W halogen flood light, but is 30% narrower than a standard halogen floodlight. This compact LED light produces far more light than traditional incandescent lamps yet uses far less power.The Larson Electronics LEDWP-50-DT LED wall pack draws only 6 watts @.05 amps at 120V AC (@.5amps at 12VDC). The light assembly consists of six, 1 watt LEDs paired with high purity specular optics to produce a total lumen output comparable to that of a 50-75 watt halogen lamp. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment.The LEDWP-50-DT consists of six, one watt LEDs housed within a waterproof polycarbonate housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. Dark warehouse, illuminated by a distant 75W incandescent bulb. Same warehouse being illuminated by the LEDWP-50-DT. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.Mounting hardware for the LEDWP-50-DT consists of a stainless steel U-bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 380/180 degrees of rotation to allow the user to position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 240V AC. Alternatively, the unit can be configured to run off 12/24VDC low voltage current, providing versatile power connection options and the ability to run the unit with commonly encountered voltages. The LEDWP-50-DT provides an efficient and highly durable alternative to standard incandescent and halogen wall pack lights that produces a more far reaching beam while using only a fraction the power.With the LEDWP-50-DT there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 100,000 hours of operation. The LEDWP-50-DT is ideal for wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a few examples.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information LEDWP-50-DT LED Wall Pack LightLEDWP-50-DT FeaturesLamp Type: LEDWaterproof/Vapor ProofDimensions: 5"W x 4.25"D x 4.5"HOperates on 110-240V AC or 12/24 VDC Weight: 1.2 lbsImpact/Vibration Resistant ConstructionWatts: 6W50,000 Hour LED Life Lumens: 1162ETL Approved for WET LOCATIONS Voltage:110-240 Volts AC or 12/24 Volts DCLighting Configuration: Flood Mounting: Adjustable Bracket on Mini-Pedestal BaseWiring: 6" PigtailAmps: .05 @ 120V AC; .5 @ 12V DCSpecial Orders- RequirementsLED Light Color: N/AContact us for special requirements LED Life Expectancy: 50,000 hoursToll Free: 1-800-369-6671Materials: Polycarbonate Housing, Polycarbonate LensIntl:1-903-270-1187Housing Colors: Black E-mail:[email protected] Scroll Down to Purchase-