Larson Electronics 6W Compact LED Fixture - C1D2 Hazardous Location Light - Equipped with Male Turck Connector

Buy American Compliant The Larson Electronics HAL-7W-LED-V3-TRK is a low voltage hazardous area lighting solution approved for Class 1 Division 2 Environments and 1598 compliant for use in wet locations. This 6-watt LED light produces 587 lumens, operates from 12 or 24V DC, and is available in a variety of configurations to allow tailoring to the specific requirements of various applications. The LED fixture comes equipped with a male Turck connector on the back. The HAL-7W-LED-V3-TRK is designed to provide a high output and ruggedly durable lighting solution for applications where Class I, Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of 16/3 SOOW cord, which is terminated in a male turck connector. This 6-watt light is constructed of precision machined aluminum for excellent strength and durability and is rated IP66 for ingress protection against direct exposure to high pressure water spray. The HAL-7W-LED-V3-TRK is available in a 30 degree spotlight beam configuration for distance and a 120 degree configuration for wide area illumination, and a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps. Durability: The HAL-7W-LED-V3-TRK hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wet conditions are commonly encountered. High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight configuration for long beam length or 120 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a higher light output than similar fixtures equipped with thicker glass lenses. The HAL-7W-LED-V3-TRK has multiple color temperature options and is offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The mounting yoke is predrilled with two _ inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where space is limited and a heavy fixture cannot be installed due to lack of support. Wiring/Power: These hazardous location LED lights are equipped with a male Turck connector. These lights operate from 12 or 24 volt DC current at 6 watts. Versatility: The HAL-7W-LED-V3-TRK is ETL approved for Class I Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof rating ensuring protection against ingress from oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with hazardous location classification where wet conditions are commonly encountered. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-7W-LED-V3-TRK Hazardous Location LED Light Ratings Lamp Type: LED Class I, Division 2 Groups A,B,C,D Lamp Dimensions (w/o Bracket): 3.47"Dia x 4.44"D CSA 22.2 No. 250.0 Lamp Dimensions (w/ Bracket): 4.87"H x 4.22"W UL 1598 Weight: 2.3 lbs | 1.04 kg IP66 Ingress Protection Watts: 6W T3 Temperature Rating Voltage: 12-28V DC LM-80 > 60,500 hrs (based on Cree long term tests) Lumens: Spot: 587 - Flood: 459 Lamp Life Expectancy: 100,000 Hours CRI: CW: 75, NW: 75, WW: 80 Amps: 0.5 A @ 12V DC | 0.25 A @ 24V DC Light Color: CW: 6500K, NW: 4300K, WW: 3500K Beam Type: 30¡ Spot or 120¡ Flood Mounting: 1/4" - 20 Screws / Aluminum Yoke Materials: Machined Aluminum Housing - Acrylic Lens Special Orders- Requirements Housing Finish: Clear Anodized Finish Contact us for special requirements Temp Range: -40¡C to +85¡C Toll Free: 888-325-4448 Typical Case Temperature: ~20¡C Above Ambient Temperature Intl: 1-214-616-6180 Wiring: Male Turck Connector on Back of Fixture E-mail: [email protected] -Scroll Down to Purchase-