Larson Electronics 60W Low Profile LED Light - Wide Flood Beam - Pipe Clamp Mount - 25' 16/3 SOOW w/ Gen. Area Cord Cap

The LEDWP-600E-PCM-25C from Larson Electronics is an LED Pipe Mount Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood beam without the high heat, fragile construction, or high energy costs of incandescent lighting. The innovative pipe mount clamp equipped on this unit allows the light fixture to be mounted on horizontal or vertical pipes that are square or round. The LEDWP-600E-PCM-25C LED wall pack light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120V AC. The light assembly consists of six LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. The LEDWP-600E-PCM-25C consists of six LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. Warehouse illuminated by theLEDWP-600E-PCM-25C LEDWP-600E-PCM-25C mounted 15` high illuminating a 30` long by 50` wide parking area. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Mounting: Mounting hardware for the LEDWP-600E-PCM-25C consists of a stainless steel coated pipe clamp mount bracket to provide secure mounting and resistance to rust and corrosion. The mounting assembly allows the light fixture to be securely and easily attached to square or round pipes both horizontally or vertically. Operators simply loosen the bolt on the pipe clamp mount, place it over the desired pipe and then tighten the bolt until the fixture has a secure grip on the pipe. The included pipe mount bracket is available in three different sizes (small, medium or large) to accomodate pipes with different diameters. The medium size pipe mount will fit on pipes ranging from 7/8" to 1" in diameter. For mounting on pipes with a smaller diameter, choose the small option. For mounting on pipes with a larger diameter, choose the large option. Make your selection below when ordering. These pipe mount clamps also provide 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted. Voltage: This unit is designed to operate with voltages ranging from 110V AC to 277V AC 50/60 Hz. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: This general use pipe mount LED light fixture is equipped with 25 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. The LEDWP-600E-PCM-25C provides an efficient and highly durable alternative to standard quartz and and halogen wall pack lights that produces a longer reaching beam while using only a fraction of the power. With the LEDWP-600E-PCM-25C there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. Suggested Applications: Upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, security systems, warehouses, work areas, workshops, garages, farm buildings and outbuildings just to name a few examples. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDWP-600E-PCM-25C Pipe Mount LED Light Features Listing: United States - Canada Waterproof/Vapor Proof Lamp Type: Cree LED Operates on Standard 110-277V AC Dimensions: 9"W x 3.25"D x 6.5"H Impact/Vibration Resistant Construction Weight: 8.7 lbs 50,000+ Hour LED Life Voltage: 100-277 Volts AC, 50/60Hz ETL Approved for Wet Locations Total Watts: 60W IP68 Waterproof Total Lumens: 5400 Innovative Pipe Mount Bracket Included Luminous Efficacy: 90 Lm/W LED Life Expectancy: 50,000+ hours Color Temp: 5600K, 4000K, or 3000K Color Rendering Index: 80 Beam Angle: 60¡ Vertical, 75¡ Horizontal Lighting Configuration: Flood Beam Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.5A @ 120V, 0.25 @ 240V, 0.22 @ 277V Ambient Temp Range: -25¡C to +60¡C Housing Material: Cast Aluminum Lens Material: Polycarbonate Special Orders- Requirements Mounting: Pipe Mount Contact us for special requirements Wiring: 25` 16/3 SOOW w/ General Area Cord Cap Toll Free: 1-800-369-6671 Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail Warranty: Yes - 3 Years* E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. -Scroll Down to Purchase-