Larson Electronics 60W LED Pole Light w/ Glare Shield - Wide Flood Beam - 28.45" Steel Pedestal Pole - Surface Mount

The IND-SMP.18-WP60E LED Pole Light w/ Glare Shield is a powerful lighting solution for rugged and outdoor work sites. This 60-watt LED light produces a wide flood beam without the high heat, fragile construction or high energy costs of incandescent lighting. Mounted on a steel pedestal pole, the unit is equipped with a glare shield and an adjustable U-bracket mount for accurate positioning. The LED pole light is offered in 120-277V AC or 11-25V AC/DC; as well as the following color temperature options: 5,600K, 4,000K or 3,000K. The IND-SMP.18-WP60E provides wide-area illumination in outdoor work sites. Mounted on a 28.45" steel pedestal pole, this 60-watt unit produces a long flood beam of light while drawing only 0.5 amps. Without the LED light head, the pole measures 18.625". The light assembly consists of six LEDs paired with high purity specular optics to produce wide-light distribution overpowering that of a 500-watt quartz floodlight. The luminary is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are offset by 45¡. The LED light head is housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. This LED fixture is designed to withstand demanding conditions and is waterproof, vapor proof and built to resist the damaging effects of outdoor environments. The LED pole light comes with 17" of pigtail wiring. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Warehouse illuminated by theLEDWP-600E LEDWP-600E mounted 15` high illuminating a 30` long by 50` wide parking area. Mounting: The IND-SMP.18-WP60E is surface-mount compatible, via an 8"x8" mounting plate. Operators can secure the pole on a preferred flat surface via four screw holes on the plate. The LED light head is mounted on the pole using an adjustable U-bracket. This component provides for 360/180 degrees of rotation and tilt to allow the user to position the unit in a range of preferred positions and angles. Suggested Applications: Outdoor illumination, hot fuel locations, general area illumination, monitoring, industrial work sites, wide-area lighting and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information IND-SMP.18-WP60E LED Pole Light w/ Glare Shield Ratings/Features Lamp Type: CREE LED Impact/Vibration Resistant Construction Light Head Dimensions: W-9" D-3.25" H-6.5" IP68 Waterproof Pole Length w/ Light Head: 28.45" ETL Approved for Wet Locations Weight: - Voltage: 120-277V AC, 50/60Hz or 11-25V AC/DC Total Watts: 60 Total Lumens: 5,400 Luminous Efficacy: 90 lm/w LED Life Expectancy: 50,000+ hours Color Temp: 5,600K, 4,000K or 3,000K Color Rendering Index: 80 Beam Angle: 60¡ Vertical, 75¡ Horizontal Lighting Configuration: Flood Beam Power Efficiency: >95% Power Factor: 0.992 Amperage: 0.5A @ 120V, 0.25 @ 240V, 0.22 @ 277V Ambient Temp Range: -25¡C to +60¡ Housing Material: Cast Aluminum Lens Material: Polycarbonate Special Orders- Requirements Pole Material: Steel Contact us for special requirements Light Head Mount: Adjustable U-Bracket Toll Free: 1-800-369-6671 Pole Mount: Surface Mount - 8"x8" Mounting Plate w/ (4) Screw Holes Wiring: 17" Pigtail E-mail:[email protected] -Scroll Down to Purchase-