The EPL-MB-50LED-100 Magnetic Mount Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and Class 2 Division 1-2 and features magnetic mounting capabilities. Equipped with a 50-watt LED lamp, the explosion proof unit produces 6,250 lumens during use. Four powerful magnets offer 800 lbs of grip, when mounted. The EPL-MB-50LED-100 magnetic mount explosion proof LED light provides 9,500 square feet of work area coverage with 6,250 lumens of light output. This portable LED light is mounted to a portable aluminum frame base with legs and has a low profile LED light head. This 50-watt unit includes a magnetic mounting attachment that allows mounting the fixture to metallic surfaces for added versatility and easy setup. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. The mounting bracket that supports the explosion proof LED lamp is constructed of non-sparking aluminum for light weight and durability, and the simple hanging design allows operators to easily remove the lamp assembly to operate the unit as a pedestal lamp if desired. This light is universal voltage capable and can be operated with 100-277V AC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25V. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. Beam Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60¡ beam provides the most intense beam of the three options. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offers focused light to provide ample illumination to tight work spaces and other environments. The 125¡ beam offers a more diffused source of light that is also less intense in brightness. It is a great general area work light and performs well when used for outdoor illumination. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Energy Consumption Comparison Metal Halide LED Wattage 175 watts 50 watts Amp Draw @ 120V AC 1.69 amps 0.42 amps Amp Draw @ 220V AC 0.92 amps 0.23 amps Amp Draw @ 240V AC 0.85 amps 0.21 amps Amp Draw @ 277V AC 0.73 amps 0.18 amps Amp Draw @ 12V DC 16.77 amps 4.17 amps Amp Draw @ 24V DC 8.39 amps 2.08 amps Lamp Life Expectancy 20,000 hours 60,000+ hours Operation cost per year(12hs/day @ 12c/kWh) $241.78 $26.30 Each LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Wiring/Plug: This unit is equipped with 100 feet of 16/3 chemical and abrasion resistant SOOW line-in cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. Mount: The magnetic mounting bracket for this unit includes four, 200 lb grip magnetic bases which provide a total of 800 lbs of grip and allows operators to mount the unit to walls and flat metallic surfaces. Users simply attach the magnetic mounting bracket to the desired surface, then hang the lamp assembly from the bracket. The LED lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two T-handle adjustment screws located on either side of the light head and retightening them once the desired angle is found. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-MB-50LED-100 - Portable Explosion Proof LED Light Ratings/Approvals Listing: United States - Canada Listed for United States and Canada Lamp Type: LED Class I, Divisions 1 & 2, Groups C and D Dimensions: 11"-W x 28.58"-H x 16.34"-D Class II, Divisions 1 & 2, Groups E, F and G Weight: - Class III, Divisions 1 & 2 Voltage: 100-277V AC, 50/60Hz Certified to UL 844 Ed. 13 Total Watts: 50W Certified to UL 1598 Total Lumens: 6,250 Certified to C22.2 No. 137 Rev 2009 Luminous Efficacy: 125 LPW Certified to C22.2 No. 250.0 Lamp Life: 60,000+ Hours Certified to C22.2 No. 30-M-1986 Rev 2012 Color Temp: 5600K, 4500K, 3000K T5 Temperature Rating Color Rendering Index: >75 CRI Paint Spray Booth Approved Beam Angle: 60¡ or 125¡ IEC 60529 Tested Lighting Configuration: Flood Pattern IP67 Rated Waterproof Power Efficiency: >95% LEL Approved Power Factor: 0.99 Single LED Driver Ambient Operating Temp Range: -50¡ C to +65¡C 80% Lumen Retention after 60,000 Hours Operating Temp Rating: T5 Factory Sealed Light Fixture Housing Material: Copper Free Cast Aluminum 100 Foot Cord Housing Finish: Epoxy Powder Coated - Grey Portable Aluminum Base Stand Mount Lens Material: Hardened Borosilicate Glass Magnetic Mount Shelf for Base Stand Gasket Material: Silicone Use as Portable or Magnetic Mount Light Base Stand/Shelf Finish: Power Coated - Gloss Blue Direct Replacement for 400W MH Work Lights Mounting: Aluminum Base Stand w/ Magnetic Mount Shelf Magnetic Force: (4) Magnets - 800lb Grip (200lb Gripping Force per Magnet) Wiring: 100` 16/3 SOOW w/ C1D1 Cord Cap Cord Cap Options: 15-Amp 5-15 (125V), 20-Amp 5-20 (125V), or 20-Amp 6-20 (250V) Special Orders- Requirements LED Driver Specs Contact us for special requirements Input Voltage: 100-277V AC Phone: 1-214-616-6180 Input Current: 1.8A Max Toll Free: 888-325-4448 Output Voltage: 54V Max Fax: 1-903-498-3364 Output Current: 2.1A E-mail: [email protected] Down to Purchase-
Larson Electronics 50W Explosion Proof LED Light - C1D1 - Magnetic Mount - Aluminum Base - 100' SOOW Cord, EXP Cord Cap
Larson Electronics
(No reviews yet)
Write a Review
Write a Review
Larson Electronics
Larson Electronics 50W Explosion Proof LED Light - C1D1 - Magnetic Mount - Aluminum Base - 100' SOOW Cord, EXP Cord Cap
- SKU:
- EPL-MB-50LED-100
- UPC:
- Weight:
- 0.00 LBS
!