Larson Electronics 50KVA Power Distribution Panel - 480V to 120/240V 1PH - (1) 330R6W (6) 5-20R GFCI - ATS

Made in Texas The Larson Electronics MPD-480.1P-50KVA-120.240V-ATS power distribution substation converts 480V AC single phase electrical current into 120/240V single phase. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-480.1P-50KVA-120.240V-ATS portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect single phase 480 volt line-in power via 10` of #4 Type W cord. On the secondary side, operators can bring in 240 volt line-in power to the secondary panel via 10` of 1/0 Type W cable (selectable using an automatic transfer switch), and connect to one 330R6W receptacle for 240V equipment and to six 5-20R GFCI receptacles for 120V equipment. Operation: A 10` #4 Type W line-in cord brings 480V single phase power to the NEMA 3R 200-amp, 480V single phase primary disconnect, which contains two 125-amp time delay fuses, and passes 480V single phase through to the transformer. The NEMA 3R 50KVA transformer converts 480V to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a 120/240V single phase 200-amp main circuit breaker NEMA 3R panel. Operators may also choose to instead use a 10` 1/0 Type W cord to bring in 240V single phase power via a NEMA 3R 200-amp, 120/240V single phase automatic transfer switch, which passes 240V single phase power to the secondary panel. This secondary panel contains one 100-amp, 2-pole, 250V breaker, one 30-amp, 2-pole, 250V breaker protecting one 30-amp, 250V, 330R6W receptacle, and six 20-amp, 125V, 1P breakers protecting six 20-amp, 125V, 5-20R GFCI receptacles. All receptacles are equipped with weatherproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480.1P-50KVA-120.240V-ATS Power Transformer Ratings Line-In Cord 1: 10` #4 2C3W Type W Cable Max Primary OCP: 125A @ 480V Line-In Cord 2: 10` 1/0 3C4W Type W Cable Max Secondary Output: 200A @ 240V Primary Voltage: 480V AC 1PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 200A 480V 1PH N3R Fused @ 125A NEMA 3R Indoor / Outdoor Use Primary Protection: Disconnect Made in the USA Transformer: 50 KVA 480V to 120/240V 1PH 60 Hz N3R ATS Automatic Transfer Switch: 200A 120/240V 1PH N3R Secondary Voltage: 120/240V 1PH Secondary Panel: 200A 120/240V 1PH MCB N3R Secondary Breakers: (1) 100A 2P [250V], (1) 30A 2P [250V], (6) 20A 1P [125V] Secondary Receptacles: (1) 30A 2P3W 330R6W [250V], (6) 20A 5-20R GFCI [125V] Secondary Protection: GFCI, Weatherproof Covers Special Orders- Requirements Form Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Intl: 1-214-616-6180 Weight: 600 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase