Larson Electronics 480V Surface Mount Explosion Proof Fluorescent Lights -Paint Booth - Rigs - 2 Lamp - 4 foot - T5HO

Made in the USAThe Larson Electronics EPL-48-2L-480V-T5HO Explosion Proof Fluorescent Light Fixture is NRTL Listed for United States and Canada, Class 1 Division 1 and Class 1 Division 2 for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The unit carries a T6 temperature rating, operates with 480 VAC, and is approved for Paint Spray Booths.The EPL-48-2L-480V-T5HO fixture is a 4 foot long, 2 lamp, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with two fluorescent lamps. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is configured to operate with 480 VAC high voltage current only. The EPL-48-2L-480V-T5HO provides operators in hazardous locations with a reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.Click Image to EnlargeClick Image to EnlargeClick Image to Enlarge Click Image to EnlargeClick Image to EnlargeClick Image to EnlargeMounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.Energy Consumption ComparisonT5HO T8 LEDWattage 108 watts 64 watts 48 wattsAmp Draw @ 120V AC 0.9 amps 0.54 amps 0.4 ampsAmp Draw @ 277V AC 0.39 amps 0.24 amps 0.18 ampsAmp Draw @ 12V DC 9 amps 5.34 amps 4 ampsAmp Draw @ 24V DC 4.5 amps 2.67 amps 2 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursColor Temperature 5000K / 4100K 4100K 5300KOperation cost per year(8hs/day @ 11c/kWh) $34.69 $20.56 $15.42Made in USA Quality Lamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 (Suffix –50KT5)F54-T5/841/HO - 54 watt, 4450 lumens per bulb, 20,000 hour life, 4100 Kelvin color, CRI 85 (Suffix -41KT5) Specifications / Additional Information EPL-48-2L-480V-T5HO Explosion Proof RatingsNRTL Listed for United States & Canada Class 1 Division 1, Groups C and DDimensions: W-11.25" L-52" H-8.5 " Class 1 Division 2, Group A,B,C,DWeight: 65 Lbs Class II Division 1- 2, Groups E,F,GTotal Watts: 108 watts* NRTL Certified to UL 844, 924Voltage: 480 VAC NRTL Certified to UL 1598 Marine TypeTotal Lumens: STD-T5-HO Bulbs 10000 NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours Listed for Paint Spray Booths*Efficiency: STD-T5-HO Bulbs 83 Lumens per Watt California Title 24 CompliantAmbient Operating Temp Range:-20 C to 70 C* Beam Angle: N/A Special Orders- RequirementsColor Temp: 5000k or 4100k Contact us for special requirementsMounting: Bracket Standard - Pendant Optional Phone: 1-214-616-6180Wiring Hub: 1/2 inch threaded Toll Free: 888-325-4448Operating Temp Rating: T6 Rated Fax: 1-903-498-3364Minimum Operating Temp: -30 C E-mail: [email protected] Case Temp: 90 C ?