Larson Electronics 45 KVA Power Distribution - 480V to 208Y/120V 3PH - (6) Receptacles, GFCI Breakers - Galvanized

Made in Texas The Larson Electronics MGS-4803P.100A-PS-45KVA-208.1203P.150A-6XMG Power Distribution Substation converts three phase 480V AC electrical current into three phase 208Y/120V AC. This galvanized unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use The MGS-4803P.100A-PS-45KVA-208.1203P.150A-6XMG portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 480V line-in power via 20` of #4 Type W cord with a 100-amp 4100P7W cord cap. On the secondary side, operators connect to one HBL63CM69 receptacle for 240V equipment and to five HBL53CM62 receptacles for 120V equipment. All receptacles are equipped with in-use waterproof covers and all breakers on the secondary side feature GFCI protection. Operation: The 20` #4 Type W line-in cord with a 100-amp 4100P7W cord cap brings 480V three phase power to the NEMA 3R 100-amp 480V three phase primary main circuit breaker panel, which contains one 70-amp 3-pole 480V breaker and passes power to the transformer. The NEMA 3R 45 KVA transformer converts three phase 480V AC to three phase 208Y/120V AC 60Hz and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 150-amp three phase 208Y/120V AC main circuit breaker panel. This secondary panel contains one 50-amp 2-pole 250V GFCI breaker protecting one 50-amp 125/250V HBL63CM69 receptacle and five 20-amp 1-pole 125V GFCI breakers protecting five 20-amp 125V HBL53CM62 receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this galvanized unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4x equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-4803P.100A-PS-45KVA-208.1203P.150A-6XMG Power Transformer Ratings Line-In Cord: 20` #4 Type W Cord Max OCP Primary: 100A @ 480V Line-In Cord Cap: 100A 4100P7W [480V] Max OCP Secondary: 150A @ 208V Primary Voltage: 480V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: - NEMA 3R Indoor or Outdoor Use Primary Panel: 100A 480V 3PH MCB N3R Made in the USA Primary Breakers: (1) 70A 3P [480V] Primary Receptacles: - Primary Protection: Circuit Breaker Transformer: 45KVA 480V to 208Y/120V 3PH 60Hz N3R Secondary Voltage: 208Y/120V AC 3PH Secondary Panel: 150A 208Y/120V 3PH MCB N3R Secondary Breakers: (1) 50A 2P GFCI [250V], (5) 20A 1P GFCI [125V] Secondary Receptacles: (1) 50A HBL63CM69 [125/250V], (5) 20A HBL53CM62 [125V] Special Orders- Requirements Secondary Protection: GFCI Breakers, In-use Waterproof Receptacle Covers Contact us for special requirements Form Factor: Square tube frame w/ 1/8" side walls, hinged access doors, skid pockets, top pick eye & 8” locking casters Toll Free: 888-325-4448 Frame Materials: Galvanized steel frame Intl: 1-214-616-6180 Dimensions: 48” X 48” X 62” Fax: 1-903-498-3364 Weight: 600 pounds E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase