Larson Electronics 400VA Remote Emergency Power Inverter - 90 Minute Emergency Run Time

The LEDEMG-400VA from Larson Electronics is a 400V Emergency Lighting Inverter that works in conjunction with LED, fluorescent or incandescent lighting loads to create an emergency lighting system. The LEDEMG-400VA supports a maximum load of 400VA. This unit consists of a sealed lead calcium battery, charger and circuitry contained within a steel case. The LEDEMG-400VA provides power on the input side of connected fixtures including the ballast and can be used in both indoor and outdoor emergency lighting applications.In the event of a normal power failure, the LEDEMG-400VA instantly begins to provide emergency power to connected fixtures for up to 90 minutes. During those 90 minutes, the unit will provide up to 91% of the lumen rating of the connected fixtures. Once normal power is restored, this emergency lighting inverter will begin to recharge. The battery capacity will be fully restored in 72 hours from the start of the recharge process. Power: The LEDEMG-400VA has an inpute voltage of 120V AC at 60HZ or 277V AC at 60Hz and an output voltage of 120V AC at 60Hz or 277V AC at 60Hz. The output frequency is synchronized to the connected utility within a +/- 2Hz range during emergencies. This remote emergency inverter has a <1 millisecond transfer time to inverter following a power failure. Battery: This unit features a maintenance-free sealed lead calcium battery. The 36V battery features automatic low-battery voltage disconnect and reverse polarity protection.Installation: The LEDEMG-400VA is a remote emergency lighting inverter and can be installed up to 1000 feet away from the fixture. It can be installed with both switched and unswitched fixtures.Mounting: The LEDEMG-400VA is designed to be surface mounted up to 1000 feet away from the emergency fixture.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information LEDEMG-400VA Remote Emergency Power InverterRatings/Features:Type: Remote Emergency Power Inverter UL924 Emergency Lighting CompliantBattery Type: Maintenance-free Sealed Lead CalciumSealed Lead Calcium Rechargeable BatteryCase Dimensions: 22" W x 8" D x 16" HOne Millisecond Transfer TimeWeight: 132 lbsRemote Installation up to 1000` From FixtureTemperature Rating: 20¡C to 30¡CSine Wave OutputBattery Voltage: 36VIndicator Lights Signal StatusInput Voltage: 120V AC 60Hz or 277V AC 60Hz72 Hour Battery Recharge TimeOutput Voltage: 120V AC 60Hz or 277V AC 60Hz90 Minute Emergency Run TimeMaximum Load Power: 400VA91% Lumen Retention During Emergency OperationBattery Recharge Time: 72 hoursTransfer Time: <1 msOutput: Sine WaveCase Material: SteelMounting: Surface MountSpecial Orders- RequirementsInstallation: Remote (Up To 1000` Away From Fixture)Contact us for special requirements Emergency Run Time: 90 minutesToll Free: 1-800-369-6671 Emergency Lumen Retention: 91%Intl: 1-903-270-1187Warranty: Yes- 3 Years*E-mail:[email protected] Scroll Down to Purchase-