Larson Electronics 30KVA Power Distribution Panel - 220V to 480V 3PH - (1) 430R9W PT (1) 430R7W Receptacles

Made in Texas The Larson Electronics MPD-1X220.30-30KVA-1X480.30 power distribution substation converts 220V AC three phase electrical current into 480V AC three phase. This unit provides operators the ability to safely tap into and distribute 220V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-1X220.30-30KVA-1X480.30 portable power distribution system gives operators the ability to power their 220 volt and 480 volt equipment from a single system. On the primary side, operators connect 220 volt line-in power via a customer-provided cord to one 430R9W pass-through receptacle for 220V equipment. On the secondary side, operators connect to one 430R7W receptacle for 480V equipment. All receptacles are equipped with weatherproof covers. Operation: A customer-provided line-in cord brings 220V three phase power to the first NEMA 3R 30-amp 250V three phase primary disconnect, which contains three 30-amp time delay fuses protecting one 30-amp 250V 430R9W pass-through receptacle, and passes power through to the second primary disconnect. The second NEMA 3R 100-amp 250V three phase primary disconnect contains three 80-amp time delay fuses and passes power to the transformer. The NEMA 3R 30KVA transformer converts 220V to 480V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 30-amp 250V three phase secondary disconnect, which contains three 30-amp time delay fuses protecting one 30-amp 480V 430R7W receptacle. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-1X220.30-30KVA-1X480.30 Power Transformer Ratings Line-In Cord: Customer Provided Max Primary OCP: 100A @ 220V Line-In Cord Cap: Customer Provided Max PDU OCP: 80A @ 220V Primary Voltage: 220V AC 3PH Max Secondary Output: 36.1A @ 480V Primary Disconnects: (1) 100A 250V 3PH N3R Fused @ 80A, (1) 30A 250V 3PH N3R Fused @ 30A UL 1640 Portable Power-Distribution Equipment Primary Receptacles: (1) 30A 430R9W PT [250V] NEMA 3R Indoor / Outdoor Use Primary Protection: Time Delay Fuses, Weatherproof Cover Made in the USA Transformer: 30KVA 220V to 480V 3PH 60Hz N3R Secondary Voltage: 480V AC 3PH Secondary Disconnect: (1) 30A 480V 3PH N3R Fused @ 30A Secondary Receptacles: (1) 30A 430R7W [480V] Special Orders- Requirements Secondary Protection: Time Delay Fuses, Weatherproof Cover Contact us for special requirements Form Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Phone: 1-214-616-6180 Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Fax: 1-903-498-3364 Weight: 600 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase