Larson Electronics 30KVA Power Distribution - 480V to 208Y/120V 3PH- (1) 460R7W (12) 5-20R GFCI - 30' Cord

Made in Texas The Larson Electronics MPD-120240-MTS-400A-CL-MS power distribution substation is equipped with a 120/240 single phase manual transfer switch, male cam-lock inputs and two selectable output receptacles. This unit provides operators the ability to safely tap into and distribute 120/240V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-120240-MTS-400A-CL-MS portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 120/240V AC single phase via two sets of E1016 male cam-lock inputs (black, red, white, green). On the secondary side, operators are provided access to one MS90555C52412S and LM00C52-124N receptacles for 120/240V AC equipment. Operators must select the source of line-in power from the manual transfer switch before using the preferred receptacle. All receptacles are equipped with weatherproof covers. Operation: Customer provided line-in cords bring 120/240V AC single phase power into two sets of 400-amp 600V rated E1016 male cam-lock inputs (black, red, white, green) on the NEMA 3R 400-amp 120/240V AC single phase main transfer switch. Operators must select the preferred output receptacle on the main transfer switch before use. The output side of the system contains one 200-amp MS90555C52412S and one 200-amp LM00C52-124N receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4x equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-120240-MTS-400A-CL-MS Power Transformer Ratings Line-In: (2 Sets) 400A 600V Rated E1016 Male Cam-locks [Black, Red, White, Green] Max OCP Primary: 400A @ 240V Line-In Cord Cap: - UL 1640 Portable Power-Distribution Equipment Primary Voltage: 120/240V AC 1PH NEMA 3R Indoor or Outdoor Use Manual Transfer Switch: 400A 120/240V AC MTS N3R Primary Receptacles: (1) 200A MS90555C52412S [120/240V], (1) 200A LM00C52-124N [120/240V] Special Orders- Requirements Primary Protection: Weatherproof Covers Contact us for special requirements Form Factor: Square tube frame w/ 1/8" side walls, hinged access doors, skid pockets, top pick eye & locking 8” locking casters Phone: 1-214-616-6180 Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 48” X 48” X 62” Fax: 1-903-498-3364 Weight: 550 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase