Larson Electronics 30KVA Power Distribution - 480V Pri. - 208/120V Sec. (2) 480V Outlet - (16) 5-20 GFCI & (2) Outlets

Made in Texas The MGS-2X480.60-30K-16X120.20-2X208.30 portable power distribution system is designed to enable operators to connect two 60-amp welders to the primary panel. Simultaneously, on the secondary side, operators can connect up to sixteen 120V, 20-amp devices and two 208V, 30-amp devices. This versatile system enables operators to make the most of a single 480V 3-phase connection via a 20-foot #6 line-in SOOW cable. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Operation: The 20’ line-in cable brings 480V power to the 150-amp main circuit breaker panel, which contains breakers protecting two 60-amp receptacles and the 30KVA transformer. The NEMA 3R transformer converts 480V 3-phase power to 120/208Y and passes the current to the secondary panel. The 100-amp main circuit breaker NEMA 3R panel contains sixteen 20-amp, 120V breakers protecting sixteen 20-amp GFI 5-20 receptacles. The panel also includes two 30-amp, 208V breakers protecting two L6-30R receptacles. All receptacles are equipped with waterproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-2X480.60-30K-16X120.20-2X208.30 Power Distribution System Ratings Line In: 20’ of #6 4C SOOW cable w/ Blunt Cut End UL 1640 Portable Power-Distribution Equipment Primary Voltage: 2480V 3P NEMA 3R Indoor or Outdoor Use Primary Panel: 150A MCB N3R Made in the USA Primary Breakers: (2) 480V 60A (RCPT) & (1) 60A (TXF) 150A MCB N3R Primary Receptacles: (2) 480V 60A 3P4W w/ Weatherproof Covers Transformer: 30KVA 480V to 208Y/120 N3R Secondary Panel: 100A MCB 3P 208Y/120 Secondary Breakers: (2) 30A (208V RCPT) & (16) 20A (120V RCPT) \ Secondary Panel Outlets: (2) L6-30R (208V) & (16) 5-20 GFCI (120V) w/ Weatherproof covers \ Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 8” casters \ Dimensions: 34”-L X 44”-W X 58”-H \ Weight: 650lbs \Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 36A @ 480V Toll Free: 888-325-4448 Max Secondary OCP: 83A @ 208V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase