Larson Electronics 25W LED Work Light w/ Adjustable 3.5'-10' Tripod Mount - 2750 Lumens - 120-277VAC to 12VDC

The WAL-TP.S-1X25WRE-25-1227 from Larson Electronics is a Tripod Mounted LED Work Light that offers a portable and convenient source of high-intensity LED light. This tripod mounted worklight produces a total 2,750 lumens from the single LED light head. This tripod mounted LED work light includes an inline power supply that steps down 120-277V AC to 12V DC. The WAL-TP.S-1X25WRE-25-1227 LED tripod mounted work light features one of the Larson Electronics LED25WRE-CPR LED spotlights. The LED25WRE-CPR LED light emitter from Larson Electronics produces 2750 lumens of bright light while drawing less than 2.25 amps from a 12 volt electrical system. A single CREE 25 watt LED producing 2750 lumens is combined with high output reflector to produce a narrow 10¡ spread spot beam approximately 1000` long combined with a 60¡ flood beam. This combination spot and flood beam provides both distance and width from a single light source. This particular unit is ultra compact with a 4.5" OD lamp head. The LED WRE series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. This LED work light features an inline power supply that draws current from the power source and steps it down to 12V to run the lights. This unit is designed to have 12V current running through the majority of the power cord for tank cleaning purposes that require low voltage work equipment. The power supply is installed at the end of the unit. There is 25` of cord between the light head and the power supply and an additional 1` of cord between the transformer and the included general area cord cap. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Durability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Voltage: These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP WRE series LED lights can operate on current ranging from 12 to 32VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: This general use tripod mounted LED work light is equipped with 25 feet of 16/3 chemical and abrasion resistant SOOW cord between the power supply and the light heads and an additional 1 foot of cord between the power supply and cord cap that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Mounting: This particular unit is equipped with an adjustable aluminum tripod that can reach heights up to 10 feet and be lowered to 3.5 feet for applications where a lower height is required or for storage and transportation. The heavy duty aluminum tripod is durable, lightweight and adjustable to any length between 3.5 feet and 10 feet. A single mounting bracket holds the dual LED light heads and allows them to be adjusted and aimed horizontally and vertically. This adjustability allows users to expand the area covered or to focus more intense coverage on a smaller area. The tripod legs can be collapsed and the light head bracket removed with the light still on it for simple portability and deployment. The heavy duty construction of this tripod and the light weight of the LED fixture results in a portable yet very stable lighting platform that will hold its position, even in very windy conditions. High Quality Features Superior LED Benefits 1. Low power consumption.2. Instant on/off operation.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Superior color rendering compared to HPS, LPS, MH.5. Retains 70% lumen output after 50,000 operating hours.6. Powder coated aluminum fixture body. 7. Aluminum tripod mount included8. Low profile - Light weight9. 2,750 Lumen output from 25 watts 1. 50,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information WAL-TP.S-1X25WRE-25-1227 Tripod Mounted LED Work Light Ratings/Approvals Lamp Type: CREE LED 3.5-10` Adjustable Tripod Mount Dimensions: Light Head: 5.75" x 4.36", Tripod: 3.5`-10` Impact/Vibration Resistance Weight: 15 lbs Shatterproof Lens Voltage: 120-277V AC Stepped Down to 12V DC Ambient Op Temp -40¡C to +85¡C Watts: 25W Extremely Durable and Versatile Lumens: 2,750 Luminous Efficacy: 90 Lm/W LED Light Color: 6000K LED Life Expectancy: 50,000+ hours Led Drive %: 90% Lighting Configuration: Combination 10¡ Spot & 60¡ Flood Amps: 4.17 @ 12V DC - 2.08 @ 24V DC Ambient Operating Temp Range: -40¡C to +85¡C Waterproof Rating: IP68 Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail Housing Material: Aluminum Housing Color: Black Special Orders- Requirements Lens Material: Polycarbonate Contact us for special requirements Beam Length: 1000`L Toll Free: 1-800-369-6671 Mounting: 3.5` to 10` Adjustable Aluminum Tripod Intl: 1-903-270-1187 Warranty: Yes - 1 Year* E-mail: [email protected] Scroll Down to Purchase-