Larson Electronics 25KVA Power Distribution - 460V 3P Pri. - 240/120V Sec. (4) 480V Outlet - (16) 5-20 GFCI Outlets

Made in Texas The MGS-4X460.200A-25KVA-16X120.20A portable power distribution system is designed to enable operators to connect four 200-amp welders to the primary panel. Simultaneously, on the secondary side, operators can connect up to eight 120V, 20-amp devices. This versatile system enables operators to make the most of a single 460V, 3-phase connection via a 20` 500 MCM line-in cord. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Operation: The 500MCM 20’ line-in cord brings 460V power to the 1000-amp main circuit breaker panel, which contains breakers protecting four 2000-amp ADR20034 receptacles and the 25KVA transformer. The NEMA 3R transformer converts 460V, 3-phase power to 120/240V and passes the current to the secondary panel. The 100-amp main circuit breaker NEMA 3R panel contains eight 20-amp, 120V breakers protecting sixteen 20-amp GFCI 5-20R receptacles. All receptacles are equipped with waterproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Click Photo to Enlarge Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-4X460.200A-25KVA-16X120.20A Power Distribution System Ratings Line-In Cord: 20’ 500 MCM w/ Blunt Cut End UL 1640 Portable Power-Distribution Equipment Primary Voltage: 460V 3P NEMA 3R Indoor or Outdoor Use Primary Panel: 1000A MCB N3R Made in the USA Primary Breakers: (4) 460V 200A, (1) 60A, (1) 1000A MCB N3R Primary Receptacles: (4) 460V 200A ADR20034 3P4W w/ Covers Transformer: 25KVA 460V to 240/120 N3R Secondary Panel: 100A MCB 3P 240/120 Secondary Breakers: (2) 30A (240V RCPT) & (16) 20A (120V RCPT) Secondary Panel Outlets: (16) 5-20 GFCI (120V) w/ Weatherproof covers Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 8” casters Dimensions: 34”-L X 44”-W X 58”-H Weight: 650lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 31A @ 460V Toll Free: 888-325-4448 Max Secondary OCP: 60A @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase