Larson Electronics 22W Bulkhead LED Light - 120/277V AC - Glare Shield - Dimmable Driver

The Larson Electronics WDL-BHL-12-70W-LED-PSC.H-WCM Bulkhead LED Light is designed for wall mounted and outdoor illumination. This 22-watt LED light operates on 120-277V AC @ 50/60 Hz, features a dimmable electronic driver and IP66 waterproof protection. Constructed of die cast aluminum and polycarbonate, the lamp features a glare shield. The WDL-BHL-12-70W-LED-PSC.H-WCM is suitable for bulkhead lighting applications on industrial buildings and industrial locations. Capable of serving as a direct replacement for 70-watt metal halide or pressure sodium lights, this 22-watt LED light is ideal for both indoor and outdoor use and offers 3,126 lumens of output with a color temperature rating of 4,000K or 5,000K. The LED fixture operates on voltages ranging from 120-277V AC at 50/60Hz and features an electronic dimmable driver for 0-10V dimming, as well as 2kV internal surge protection. A glare shield reduces the creation of glare and improves light distribution over the target area. The light is constructed of heavy-duty, corrosion resistant, die cast aluminum with a powder coat finish over a chromate conversion coating for a more durable option than metal halide units. Instead of using fragile glass bulbs, as with traditional fixtures, this light is equipped with tough, shatter resistant LEDs sealed in an unbreakable polycarbonate lens. Just 4” in depth, this self-contained bulkhead light is low profile, and provides instant full power illumination, projecting stable, no-flicker beam from a durable solid-state lighting source. This rugged outdoor lamp is IP66 rated and is designed to operate in extreme temperatures between -25¡C to +40¡C. LED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the WDL-BHL-12-70W-LED-PSC.H-WCM to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Wiring: This LED lamp contains 1/2" NPT hubs for completing electrical connections. The unit accepts 6 #12 AWG wiring. Mounting: The WDL-BHL-12-70W-LED-PSC.H-WCM is compatible with surface or wall mounting applications. For best results, mounting heights between 8 feet to 18 feet is recommended. Applications: Bulkhead illumination, industrial buildings, outdoor locations, wall lighting, security lighting, general illumination, marine locations, wet locations, safety lighting, warehouses, public locations, tunnels, delivery bays and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information WDL-BHL-12-70W-LED-PSC.H-WCM Bulkhead LED Fixture Ratings/Approvals Lamp Type: LED 70W HID Equivalent Dimensions: 7"-H x 12 1/8"-W x 4"-D T4 Temperature Rating Total Watts: 22W Suitable for Wet Locations Voltage: 120-277V AC @ 50/60 Hz IP66 Lumens: 3,126 lms Sealed LED Compartment LED Life Expectancy: 50,000+ Hours Glare Shield Lumens per Watt: 120 Lm/W LED Light Color: White CCT: 4,000K or 5,000K Color Rendering Index: 80+ Beam Configuration: Wide THD: <20% Power Factor: >0.90 Internal Surge Protection: 2kV Driver: Dimmable Electronic Driver Dimming: 0-10V (100% to 10% Dimming Range) Amps: 0.183A @ 120V, 0.091A @ 240V, 0.079A @ 277V Ambient Operating Temp Range: -25¡C to +40¡C Housing Material: Die Cast Aluminum Finish: Powder Coated Over Chromate Conversion Coating Lens Material: Clear Polycarbonate Special Orders- Requirements Mount: Surface Mount Contact us for special requirements Recommended Mounting Height: 8` to 18` Toll Free: 1-800-369-6671 Wiring Size: 6 #12 AWG Intl: +01-903-498-3364 Hub Size: 1/2" NPT Hubs (Tapped Coin Plugs) Fax: 1-903-498-3364 Color: Grey E-mail:[email protected] Down to Purchase-