Larson Electronics 180 Watt Portable LED Work Area Light - Waterproof - Stackable Aluminum Frame - 120/277 Daisy Chain

Made in the USA The WAL-STK-3X600E Portable, Stackable LED Work Light from Larson Electronics offers high light output, 360¡ coverage, and extreme durability within a portable aluminum frame. This versatile LED work light is IP68 rated and is waterproof to three meters. This portable LED area light produces 16,200 lumen of light while drawing only 180 watts of power. The WAL-STK-3X600E portable work area LED light provides a 16,200 lumen floodlight beam covering a complete 360¡ work area, and is a direct replacement for hot and fragile 500 watt halogen work lights. This portable LED work light is comprised of three LED light heads mounted within an aluminum frame fabricated from lightweight aluminum. Each lamp head consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The lamp head can be independently adjusted and locked into position by simply loosening the two set screws located on either side of the light head and re-tightening them once the desired angle is found. Included with this LED light is 6" SOOW cord terminating in a Nema 5-15 straight blade plug, Nema L5-15 twist lock plug, or Nema L6-15 twist lock plug. An output outlet allows operators to daisy chain fixtures together via a user provided extension cord between two units. The light assembly on this portable work light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. The LED boards and reflectors are protected by a scratch and shatter resistant polycarbonate lens attached to the aluminum housing, allowing this unit to withstand abuse that traditional halogen work lamps cannot. This LED work light is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environments and use in temporary job sites. This temporary 360¡ area LED light is universal voltage and operates on a current range of 120-277 volts 50/60 Hz. This LED light is IP68 rated, approved for use in wet locations, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The light head housing is constructed of extruded aluminum housings, rubber isolation mounts and polycarbonate lenses to provide increased durability against vibration, impact and moisture. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED work lights utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated LED emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours. Durability: This LED work area light is made up of IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These LED area lights can withstand rapid temperature changes of -40¡ Celsius to +85¡ Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are shock resistant polycarbonate. Mounting: This wide area LED flood light can be temporarily mounted via the circular pedestal base stand. A topside center hook eyelet allows for suspension hanging. A second eyelet on the bottom side of the unit allows for chandelier type mounting. These units are stackable, aiding in storage and transportation. Each unit can be stacked on top of one another. Made in USA Quality Superior LED Benefits 1. ETL Listed power supply, cable and plug2. Led lamp head requires no re-lamping. 3. Durable base mount resists toppling. 4. Extreme long life LEDs reduce maintenance and replacement costs.6. Adjustable LED light head. 7. 16,200 Lumens produced from only 180 watts.8. Shock resistant LED lamp light head. 1. 50,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. 100% recyclable.4. No toxins-lead, mercury.5. No UV light, infrared radiation or CO2 emissions.6. Bright, even light maintains consistent color over time.7. Instant on/off – No flickering, delays or buzzing. 8. Very good color rendering.9. Vibration/impact resistant.10. Significantly cooler operation.11. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information WAL-STK-3X600E Portable LED Work Light Quick Summary UL Listing: United States ETL Listed Dimensions: 9.5"-W x 17.25"-H x 10.2"-D 120-277V AC Universal Voltage Weight: 30 Lbs. Adjustable LED Lamp Head Total Watts: 180 Watts Low Amp Draw Lighting Configuration: Flood 50,000+ Lamp Life LED Lamp Lumens: 16,200 IP68 Waterproof Color Temp: 6000K 360¡ Beam Spread LED Lamp Life Expectancy: 50,000 Hours Daisy Chain Connection Operating Temp Range: -40¡C to +80¡C Materials: Aluminum Housing & Frame, Polycarbonate Lens Mounting: Portable Pedestal Frame Special Orders & Requirements Weight: 35 lbs. Contact us for special requirements Voltage: 120-277 Toll Free: 888-325-4448 Wiring: 6" SOOW Cord Terminated in Cord Cap Cord Cap: 5-15 Wall Plug, L5-15 Twist-lock, L6-15 Twist-lock E-mail: [email protected] 3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-