Larson Electronics 15KVA Temporary Power Distribution - 480 to 208Y/120V 3PH - (12) 120V GFCIs - 100' Cord

Made in Texas The Larson Electronics MGL-100C-480-15K-120-208Y-12X20 Temporary Power Distribution Station converts 480VAC electrical current into 208Y/120VAC three-phase. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MGL-100C-480-15K-120-208Y-12X20 temporary power distribution system gives operators the ability to power their 120 and 208 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power using 100` of 10/4 SOOW cord. On the secondary side, operators connect to twelve duplex GFCI receptacles for 120V equipment. Operation: A 100` 10/4 SOOW line-in cord with a NPJ3484 plug brings 480V three phase power into the NEMA 3R 30-amp 480V three phase primary disconnect, which is fused at 25 amps, and passes power through to the transformer. The NEMA 3R 15KVA transformer converts 480V to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 208Y/120V three-phase 50-amp main lug only panel. This secondary panel contains twelve 20-amp 125V 1P breakers protecting twelve 20-amp 125V duplex 520R-GFCI receptacles. Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150KVA, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL-100C-480-15K-120-208Y-12X20 Temporary Power Distribution Ratings/Approvals Line In: 100` 10/4 SOOW Cord with NPJ3484 Max Primary OCP: 25A @ 480V Primary Voltage: 480VAC 3PH Max Secondary Output: 41.6A @ 240V Primary Disconnect: 480V 3PH 30A N3R Fused @ 25A Certified for United States & Canada Primary Protection: Time Delay Fuses UL 1640 Portable Power-Distribution Equipment Transformer: 15KVA 480 to 208Y/120V 3PH N3R NEMA 3R Indoor or Outdoor Use Secondary Voltage: 208Y/120VAC 3PH Made in the USA Secondary Panel: 208Y/120V 3PH 50A MLO Panel N3R Secondary Breakers: (12) 20A 1P [125V] Secondary Receptacles: (12) 20A 520R-GFCI Duplex [125V] Secondary Protection: Circuit Breakers, GFCIs Special Orders- Requirements Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Contact us for special requirements Dimensions: 40" x 40" x 48" Toll Free: 888-325-4448 Weight: 650 lbs Intl: 1-214-616-6180 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.*All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase