Larson Electronics 150W Explosion Proof Adjustable Pole Top Mount LED Light Fixture - Slip Fitter Yoke - Wire Guard

Made in the USA The Larson Electronics EPL-PT-150LED-RT-WG Pole Top Slip Fitter LED light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. This LED light fixture is equipped with a wire guard to provide protection from damage to the fixture. This Class I Divisions 1 & 2, Class II Divisions 1 & 2 pole top slip fit mount explosion proof light fixture provides 17,500 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The EPL-PT-150LED-RT-WG pole top slip fit mount explosion proof light features an adjustable swivel bracket constructed of 3/8" aluminum that allows 270¡ of adjustment and is attached to a slip fit yoke for easy installation. The slip fit yoke is built to customer`s specs, enabling operators to mount this explosion proof LED light to their specific pole size. The wiring of the EPL-PT-150LED-RT-WG is terminated in a junction box with 3/4" threaded hub. Operators can run rigid pipe or flexible conduit to the junction box, terminating the electrical connections within. The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 17,500 lumens with a color temperature of 5000K, 4000K, 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The lamp is T5 temperature rated, Design Lights Consortium approved, and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. Click Photos to Enlarge 60¡ Beam Angle 125¡ Beam Angle 140¡ Beam Angle Beam Angles: When used as a fixed mount fixture, the varying beam angles need to be mounted at certain heights in order to achieve the greatest coverage and efficiency in both high bay and low bay lighting situations. The 60¡ beam should be mounted in high bay fixtures over 25` in height and 25` away from objects if used as a wall mounted light. The 125¡ beam is ideal for low bay fixtures in a height range of 15-25 feet and the same distance away from objects when the wall mounting option is employed. The 140¡ beam is best used as a low bay fixture in areas with a ceiling height of 15` or less or for illuminating objects up to 15` away when wall mounted. Energy Consumption Comparison Metal Halide LED Wattage 400 watts 150 watts Amp Draw @ 120V AC 3.83 amps 1.25 amps Amp Draw @ 220V AC 2.09 amps 0.68 amps Amp Draw @ 240V AC 1.92 amps 0.63 amps Amp Draw @ 277V AC 1.66 amps 0.54 amps Amp Draw @ 12V DC 38.33 amps 12.5 amps Amp Draw @ 24V DC 19.12 amps 6.25 amps Lamp Life Expectancy 20,000 hours 50,000+ hours Operation cost per year(12hs/day @ 12c/kWh) $241.78 $78.84 Each LED light fixture has the potential to save $150.00+ per year in electricity alone, not including maintenance costs, operational downtime, reduced productivity, HVAC loads, or carbon footprint. When retrofitting an entire facility with 100s of light fixtures, the return on investment of LED over metal halide becomes evident. The EPL-PT-150LED-RT-WG yoke mount explosion proof LED flood light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. The entire assembly is ETL listed Class I Divisions 1 & 2 and Class II Divisions 1 & 2 for use in hazardous locations and approved for paint spray booths. The extreme durability, universal voltage capabilities, and LED longevity make this LED flood lighting system an ideal fit for frac pads, rigs, offshore, and any application that requires a Class I Division 1 pole top light fixture. Mounting Notes: The EPL-PT-150LED-RT-WG pole top slip fit mount explosion proof light features an adjustable swivel bracket constructed of 3/8" aluminum that allows over 270¡ of adjustment and is attached to a slip fit yoke for easy installation. The slip fit yoke is built to customer`s specs, enabling operators to mount this explosion proof LED light to their specific pole size. For example, selecting a 2" OD mount means that the yoke mount will fit onto pipes or bull horns with a 2" OD. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. High Quality Features Superior LED Benefits 1. Low power consumption.2. Instant on/off operation.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Superior color rendering compared to HPS, LPS, MV.5. Retains 80% lumen output after 60,000 operating hours.6. Powder coated aluminum fixture body. 7. Slip fit yoke mount for easy installation.8. Low profile - Light weight9. 17,500 Lumen output from only 150 watts 1. 60,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-Spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information EPL-PT-150LED-RT-WG Pole Top Slip Fit Mount Ratings/Approvals Listing: United States - Canada Listed for United States and Canada Lamp Type: Cree LED Class I, Divisions 1 & 2, Groups C and D Dimensions: 16"W x 22"H x 18"D Class II, Divisions 1 & 2, Groups E,F,G Weight: 42 lbs Class III, Divisions 1 & 2 Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC Certified to UL 844 Ed. 13 Total Watts: 150W Certified to UL 1598 Total Lumens: 17,500 Certified to C22.2 No. 137 Rev 2009 Luminous Efficiency: 116.67 Lm/W Certified to C22.2 No. 250.0 Lamp Life: 60,000+ Hours Certified to C22.2 No. 30-M-1986 Rev 2012 Color Temp: 5000K, 4000K, 3000K T5 Temperature Rating Color Rendering Index: >75 CRI Paint Spray Booth Approved Beam Angle: 60¡ or 125¡ IEC 60529 Tested Lighting Configuration: Flood Pattern IP67 Rated Waterproof Power Efficiency: >95% Multiple Driver Banks Power Factor: 0.992 80% Lumen Retention after 60,000 Hours Ambient Operating Temp Range: -50¡C to +65¡C Factory Sealed Light Fixture Operating Temp Rating: T5 Recommended 15` to 40` Mounting Heigh Lamp Housing Material: Copper Free Cast Aluminum 120-277V AC or 11-25V AC/DC Lens Material: Hardened Borosilicate Glass Adjustable Swiveling Pole Top Mount Mount Material: Non-Sparking Aluminum w/ SS Hardware Multiple Slip Fit Yoke Diameters Available Gasket Material: Silicone Wire Guard Protects Light from Damage Mounting: Slip Fit Yoke Mount w/ Adjustable Bracket Mount OD: 2", 2-1/4", 2-1/2", 2-3/4", 3", 4" Special Orders- Requirements Wiring: Flying Leads inside Junction Box Contact us for special requirements Wiring Hub: 3/4" NPT Toll Free: 1-800-369-6671 Output Current: 2.1A Intl: 1-214-616-6180 Fax: 1-903-498-3364 E-mail:[email protected] Down to Purchase-