Larson Electronics 15 KVA Temporary Power Distribution - 208V to 480V 3PH - Primary and Secondary Disconnects - NEMA 3R

Made in Texas The Larson Electronics MGL15-208.3P-1X480.20A temporary power distribution system converts 208V AC electrical current into three phase 480V AC. This unit provides operators the ability to safely tap into and distribute 208V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MGL15-208.3P-1X480.20A temporary power distribution system gives operators the ability to power their 480 volt equipment from a single system. On the primary side, operators connect 208 volt line-in power via a customer provided cord. On the secondary side, operators connect 480 volt line-out power using a customer provided cord for 480V equipment. Operation: A customer provided line-in cord brings 208V AC power to the NEMA 3R 60-amp 208V three phase primary disconnect, which contains three 60-amp time delay fuses and passes 208V three phase through to the transformer. The NEMA 3R 15 KVA transformer converts 208V three phase power to 480V three phase and passes the current to the secondary disconnect. The secondary side of the transformer feeds a NEMA 3R 30-amp 480V three phase secondary disconnect. This secondary disconnect contains three 20-amp time delay fuses and caters to 480V customer provided line-out connections. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style, frame resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Click Photo to Enlarge Click Photo to Enlarge Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL15-208.3P-1X480.20A -Temporary Power Distribution System Ratings Line-In Cord: Customer Provided Max OCP Primary: 60A @ 208V Line-In Cord Cap: Customer Provided Max OCP Secondary: 30A @ 480V Primary Voltage: 208V AC 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 208V 60A Fused @ 60A N3R NEMA 3R Indoor / Outdoor Use Primary Panel: - Made in the USA Primary Breakers: - Primary Receptacles: - Primary Protection: Disconnect Transformer: 15KVA 208V to 480V 3PH N3R Secondary Voltage: 480V 3PH Secondary Disconnect: 480V 30A Fused @ 20A N3R Secondary Panel: - Secondary Breakers: - Secondary Receptacles: - Secondary Protection: Disconnect Special Orders- Requirements Form Factor: Steel Dolly Cart w/ Run Flat Tires Contact us for special requirements Frame Materials: Powder Coated Steel Frame Toll Free: 888-325-4448 Dimensions: W-40" X D-40" X H-48" Intl: 1-903-270-1187 Weight: 550 lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase