Larson Electronics 112.5 kVA Power Distribution System - 480V to 240D/120V 3PH - (18) Receptacles - N3R

Made in Texas The Larson Electronics MGS-6X480-112.5KVA-6X250-6X125 power distribution substation converts three phase 480V electrical current into three phase 240D/120V AC. This system provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MGS-6X480-112.5KVA-6X250-6X125 portable power distribution system gives operators the ability to power their 480 volt, 240 volt and 120 volt equipment from a single system. On the primary side, operators connect three phase 440V using a customer-provided cord with an included AJA40034-400RS plug and to six 320R7W receptacles for 480V equipment. On the secondary side, operators may access four CS6369 receptacles for 120/240V equipment, two L6-30R receptacles for 240V equipment and six L5-30R receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: A customer-provided cord with a 400-amp AJA40034-400RS 600V rated cord cap brings three phase 440V power to the NEMA 3R 400-amp three phase 480V primary main circuit breaker panel, which contains one 175-amp 3-pole 480V breaker and six 20-amp 2-pole 480V breakers protecting six 20-amp 320R7W 480V receptacles, and passes three phase 480V power to the transformer. The transformer consists of a NEMA 3R 112.5 KVA transformer that converts 480V to three phase 240D/120V 60Hz and passes the current to the secondary side. The secondary side of the transformer is equipped with a NEMA 3R 300-amp three phase 240D/120V main circuit breaker panel. This secondary panel contains four 50-amp 2-pole 250V breakers protecting four 50-amp CS6369 125/250V receptacles, two 30-amp 2-pole 250V breakers protecting two 30-amp L6-30R 250V receptacles and six 30-amp 1-pole 125V breakers protecting six 30-amp L5-30R 125V receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-6X480-112.5KVA-6X250-6X125 Power Distribution System Ratings Line-In Cord: Customer Provided Max Primary OCP: 400A @ 440V Line-In Cord Cap: 400A AJA40034-400RS [600V Rated] Max Secondary OCP: 300A @ 240V Primary Voltage: 440V AC, 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: - NEMA 3R Indoor / Outdoor Use Primary Panel: 400A 480V 3PH MCB N3R Made in the USA Primary Breakers: (1) 175A 3P [480V], (6) 20A 2P [480V] Primary Receptacles: (6) 20A 320R7W [480V] Primary Protection: Circuit Breakers, Weatherproof Covers Transformers: 112.5 KVA 480V to 240D/120V 3PH 60Hz N3R Secondary Voltage: 240D/120V AC, 3PH Secondary Disconnect: - Secondary Panels: 300A 240D/120V 3PH MCB N3R Secondary Breakers: (4) 50A 2P [250V], (2) 30A 2P [250V], (6) 30A 1P [125V] Secondary Receptacles: (4) 50A CS6369 [125/250V], (2) 30A L6-30R [250V], (6) 30A L5-30R [125V] Special Orders- Requirements Secondary Protection: Circuit Breakers, Weatherproof Covers Contact us for special requirements Form Factor: XL Square tube frame, skid pockets, top pick eye & 8” locking casters Phone: 1-214-616-6180 Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 42" X 48" X 52" Fax: 1-903-498-3364 Weight: 350 lbs E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase