Larson Electronics 112.5 KVA Power Distribution - 208V to 480Y/277V 3PH - Camlock Input/Output - N3R MGS-208Y.120V-400A.CL-112.5KVA-480Y.277V-100A.CL

This unit is Made In USA - Manufactured in Texas

The Larson Electronics MGS-208Y.120V-400A.CL-112.5KVA-480Y.277V-100A.CL Power Distribution Substation converts three-phase 208V AC electrical current to three-phase 480Y/277V AC. This power distribution unit provides operators the ability to safely tap into and distribute 208Y/120V AC power from a variety of sources including generators and direct grid power.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

Portable Power Distribution Purpose and Use
The MGS-208Y.120V-400A.CL-112.5KVA-480Y.277V-100A.CL portable power distribution system gives operators the ability to power their 480 volt, 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 208 volt line-in power via one set of 400-amp 600V rated male camlocks (black, red, blue, white, green) and to two, NAC3FPX-ST receptacles for 240V equipment and two, 5-20R duplex receptacles for 120V equipment. On the secondary side, one set of 150-amp 600V rated female camlocks (brown, orange, yellow, white, green) are available for 480V equipment. All receptacles are equipped with weatherproof covers.

Operation: One set of 400-amp 600V rated E1016 male camlocks (black, red, blue, white, green) bring three-phase 208V power to the NEMA 3R 400-amp, three-phase 208Y/120V main circuit breaker panel on the primary side, which contains two, 20-amp 2-pole 250V breakers protecting two, 16-amp 250V NAC3FPX-ST receptacles and two, 20-amp 1-pole 125V breakers protecting two, 20-amp 125V 5-20R duplex receptacles as well as one, 350-amp 3-pole 250V primary breaker, and passes power to the transformer. The NEMA 3R 112.5 KVA transformer converts 208V to three-phase 480Y/277V 60Hz and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 100-amp, three-phase 480Y/277V disconnect, which is protected by three, 100-amp time delay fuses. This secondary disconnect contains one set of 150-amp 600V rated E1015 female camlocks (brown, orange, yellow, white, green).

Cam Locks	Cam Locks	Disconnect	Cam Lock Fuse
Click Images to Enlarge

Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this powder coated unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customerÕs needs. Larger units are available upon request and can be equipped with skids or trailer mounted.

Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.

Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements.