Larson Electronics 11 KVA Temporary Power Distribution - 208V to 220V 1PH/BBT - 50A Secondary CB - Input/Output Cords MGL-DC-208.60A.309-11KVA-220.50A.309

This unit is Made In USA - Manufactured in Texas

The Larson Electronics MGL-DC-208.60A.309-11KVA-220.50A.309 Temporary Power Distribution Station converts single-phase 208V AC electrical current into single-phase 220V AC. This unit provides operators the ability to safely tap into and distribute 208V AC power from a variety of sources including generators and direct grid power.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

Portable Power Distribution Purpose and Use
The MGL-DC-208.60A.309-11KVA-220.50A.309 temporary power distribution system gives operators the ability to power their 220 volt equipment from a single system. On the primary side, operators connect 208 volt line-in power using 5` of 4/3 SOOW cord with a 360P6W cord cap. On the secondary side, operators may access a 5` 6/3 SOOW cord with a 360C6W connector for powering 220V equipment.

Operation: A 5` 4/3 SOOW line-in cord with a 60-amp 360P6W pin/sleeve (2P3W) male plug brings single-phase 208V power into the NEMA 3R 11 KVA buck-boost transformer. The buck-boost transformer converts 208V to 220V 60Hz and passes the current to the secondary side. The secondary side of the transformer feeds a NEMA 3R 50-amp, single-phase 250V 2-pole circuit breaker, which contains 5` of 6/3 SOOW cord with a 60-amp 250V 360C6W female connector.

Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks.

This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150KVA, and can be equipped with skids or trailer mounted.

Certification: All units are built in accordance to NFPA 70 (National Electric Code). All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations.

Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements.