Larson Electronics 10W Chemical Resistant LED Light - C1D2 - C2D2 - Non-Metallic - Polycarbonate Lens -Corrosion Resist

Made in the USA The HAL-CRNM-LED10W-PC Class I, Division 2 and Class II, Division 2 Chemical Resistant LED Light from Larson Electronics is for use in hazardous locations and 1050 total lumens. This waterproof LED equipped light is pendant, ceiling, or wall mounted, and available in 120-277V AC, 12V DC or 24V DC voltage configurations. The HAL-CRNM-LED10W-PC features a durable and resiliant polycarbonate lens. The powerful and durable HAL-CRNM-LED10W-PC explosion proof LED light from Larson Electronics is ideal for industrial applications, hazardous work spaces, and areas where gases and vapors may be present and a powerful and durable general purpose light solution is needed. The lamp housing is waterproof, constructed of corrosion and chemical resistant polycarbonate with a polycarbonate lens, USCG accepted, ABS Type approved, and NEMA 4X compliant and suitable for hose-down areas. This LED lamp has a 50,000 hour operational life and is available in 120-277V, 12V DC or 24V DC configurations for high or low voltage operation. Click Photo to Enlarge Lamp: The 10-watt LED lamp used in this unit produces nearly 3 times the illumination of incandescent lamps as measured in foot candles, at less than 1/10th of the electricity usage and without the associated heat. This LED drop light runs at operating temperatures of 55¡F, greatly reducing the chances of accidents or burns commonly associated with incandescent drop lights. The solid state LED bulb has no filament, making it resistant to damage from impacts and dropping. This lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn`t need to drag the ballast housing around. This can be particularly annoying when the ballast becomes entangled in the cord. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-CRNM-LED10W-PC Hazardous Location Non-Metallic LED Light Ratings/Approvals Lamp Type:A19 LED Listed for United States and Canada Lamp Dimensions (Ceiling Mount): 10.84"H x 4.75"OD Class I, Division 2, Groups A, B, C, D Lamp Dimensions (Pendant Mount): 11.20"H x 4.53"OD Class I, Zone 2, Groups IIC, IIB, IIA Lamp Dimensions (Wall Mount): 7.3"L x 5.19"W x 12.26"H Class II, Division 2, Groups F, G Weight: 3 lbs IP66 Voltage:120-277V AC, 12VDC or 24VDC NEMA 3, 4, 4X Total Watts: 10W UL 844 Hazardous Locations Lumens: 1,050 UL 1598 Luminaries Luminous Efficacy: 105 Lm/W UL1598A Marine Luminaries Lamp Life: 50,000+ Hours CSA C22.2 No. 137 Hazardous Locations Color Temp: 6000K, 4500K, 3000K, Red, Blue, Amber, or Green UL 94-V-0 Flame Retardant Color Rendering Index: >80 CRI USCG Accepted Beam Angle: Omni-Directional ABS Type Approved Lighting Configuration:Steady Burn New York City Department of Buildings Approved Power Efficiency: >95% Power Factor: 0.992 Amp Draw: 0.083A @ 120V, 0.042A @ 240V, 0.036A @ 277V, 0.42A @ 24V Ambient Operating Temp Range: -50¡C to +85¡C Operating Temp Rating: T2D Housing Material: Polycarbonate Special Orders- Requirements Lens Material: Polycarbonate Contact us for special requirements Mounting: Ceiling, Pendant, or Wall Toll Free: 888-325-4448 Wiring Hub: 3/4" NPT Warranty: Yes - 3 Years* E-mail: [email protected] Down to Purchase-