Larson Electronics 10KVA Temporary Power Distribution - 220V to 110V 1PH - (10) 110V Duplex GFCI Receptacles MGL-10KVA-220-110-10X110.20

This unit is Made In USA - Manufactured in Texas

The MGL-10KVA-220-110-10X110.20 from Larson Electronics is a Temporary Power Distribution System that converts 220 V AC electrical current into single phase 110 V AC. This unit provides operators the ability to safely tap into and distribute 220 V AC power from a variety of sources including generators and direct grid power.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

The MGL-10KVA-220-110-10X110.20 temporary power distribution system gives operators the ability to power their 110 volt equipment from a single system. On the primary side, operators connect 220 volt line-in power via 25` of #10 SOOW cord. On the secondary side, operators connect to ten duplex GFCI receptacles for 110 V equipment.

Operation: A 25` #10 SOOW line-in cord brings three phase 220 V AC power to the NEMA 3R 30-amp 220 V three phase primary disconnect, which contains two 30-amp time delay fuses, and passes 220 V single phase through to the transformer. The NEMA 3R 10 kVA transformer converts 220 V to 110 V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 100-amp 110 V single phase main lug only panel. This secondary panel contains ten 20-amp breakers protecting ten duplex GFCI 120V receptacles.

Click Photo to Enlarge	Click Photo to Enlarge	Click Photo to Enlarge

Click Photo to Enlarge	Click Photo to Enlarge

Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style, frame resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks.

This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 kVA, and can be equipped with skids or trailer mounted.

Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations.

Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements.