Larson Electronics 100W Low Profile Explosion Proof LED Light - 2x4 Lay-In Mount - Class 1 Div 1 - Paint Spray Booth

Made in Texas The HAL-LI-48-2X50LED from Larson Electronics is a Hazardous Area LED Lay-In Light Fixture that is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This LED lay-in mount fixture is ETL listed Class I Divisions 1 & 2, Class II Divisions 1 & 2, and is approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical/petrochemical vapors are present. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HAL-LI-48-2X50LED Explosion Proof fixture is a 2x4 Class I Divisions 1 & 2 hazardous location lay-in LED light fixture and is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by a front access aluminum framed, hinged, 3/16" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish. This Class I Divisions 1 & 2, Class II Divisions 1 & 2 explosion proof light fixture provides 14,000 lumens of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. The integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twenty-four individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. This light is universal voltage capable and can be operated with 100-277 V AC, 50/60 Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 14,000 lumens with a color temperature of 5000 K, 4000 K, or 3000 K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. Mounting: This fixture features a troffer lay-in mounting design housing that measures only 8" in thickness and 2` wide by 4` long, resulting in a very low profile fixture that is deal for flush mounting in ceilings that utilize standard sized ceiling tiles. This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s door frame will extend 3/8" into the spray booth. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-LI-48-2X50LED HAZLOC Lay-In Mount Light Ratings/Approvals Listing: United States - Canada Listed for United States and Canada Lamp Type: Cree LED Class I, Divisions 1 & 2, Groups C and D Dimensions: 47.5"L x 23.5"W x 8"D Class II, Divisions 1 & 2, Groups E,F,G Weight: 75 lb Class III, Divisions 1 & 2 Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC Certified to UL 844 Ed. 13 Total Watts: 100 W Certified to UL 1598 Total Lumens: 14,000 Certified to C22.2 No. 137 Rev 2009 Luminous Efficacy: 140 Lm/W Certified to C22.2 No. 250.0 Lamp Life: 60,000+ Hours Certified to C22.2 No. 30-M-1986 Rev 2012 Color Temp: 5600 K, 4500 K, 3000 K T5 Temperature Rating Color Rendering Index: >75 CRI Paint Spray Booth Approved Beam Angle: 60¡ or 125¡ IEC 60529 Tested Lighting Configuration: Flood Pattern IP67 Rated Waterproof Power Efficiency: >95% LEL Approved Power Factor: 0.992 Multiple Driver Banks Ambient Operating Temp Range: -50¡C to +65¡C 80% Lumen Retention after 60,000 Hours Operating Temp Rating: T5 Factory Sealed Light Fixture Housing Material: Copper Free Cast Aluminum 3.5kV Surge Protection (NTC Circuit) Housing Finish: Epoxy Powder Coated - Grey Suitable for Locations with Paint Deposits Lens Material: Hardened Borosilicate Glass Made in the USA Gasket Material: Silicone Special Orders- Requirements Mounting: Recessed Lay-In Mounting Contact us for special requirements Wiring Hub: 3/4" NPT Toll Free: 888-325-4448 Intl: 1-214-616-6180 E-mail: [email protected] -Scroll Down to Purchase-