Made in Texas The MPD-CD5-RB2-BS.100AB-YT0YT-LZ-2.L09-10.N10-M1 from Larson Electronics is a Temporary Power Distribution System that provides operators the ability to safely tap into and distribute 208Y/120V AC power from a variety of sources including generators and direct grid power. All of the system's electrical connections sit at least 18" above the ground. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MPD-CD5-RB2-BS.100AB-YT0YT-LZ-2.L09-10.N10-M1 temporary power distribution system gives operators the ability to power their 208 volt and 120 volt equipment from a single system. Operation: ¥ Primary Voltage: 3-phase 208Y/120V AC Wye ¥ Primary Receptacles: (2) L6-30R NEMA Twist Lock Receptacles [208V], (10) 5-20R NEMA DPLX GFCI Recessed Receptacles [125V] ¥ Transformer: N/A ¥ Secondary Voltage: N/A ¥ Secondary Receptacles: N/A *See specification table at the top of the page for more information about the power distribution system. Recessed Receptacles: This unit features recessed receptacles that are installed flush with the system's enclosure. This design offers increased durability thanks to the reduced number of parts used and to the elimination of the nipples needed for externally mounted bell boxes. In other words, there are less things to potentially break, fail, rust, or become otherwise compromised. Protective Construction: The MPD-CD5-RB2-BS.100AB-YT0YT-LZ-2.L09-10.N10-M1 is rated NEMA 3R weatherproof when it is not in use. This means that it can be left outside as long as none of the receptacles have anything plugged into them. It is NOT NEMA 3R rated when in use or when the receptacles are engaged. Larson Electronics offers additional covers that can be added to this unit to make it NEMA 3R rated while in use as well. Please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements. A weatherproof left hinge panel serves as protection in rugged environments when deployed at the site. The NEMA 3R panel is equipped with a lock for additional security and features a glossy blue powder coated finish for additional durability and corrosion resistance. A drain plug on the panel helps the power distribution system achieve a NEMA 3R rating, allowing the unit to be used in both indoor and outdoor locations. The transformer is protected by vibration isolators that reduce damage to exterior jacket of wiring components and decrease noise during operation. In MGL-style power distribution systems, the presence of vibration isolators ensures wiring between the transformer and panel is well protected and does not have to be frequently replaced. Vibration isolators can also be found on the breakers, which protect the breakers from damage, prevent loose bolts/nuts and reduce overall noise during use in the field. The power distribution system is constructed of steel with a polyester powder coated blue finish for durability against dirt, moisture, and mild corrosion. This special coating creates a high-strength barrier for protection from accidental bumps and scratches. The TGIC polyester powder coat finish offers reliable resistance against chemicals, UV light (sun light) and degrading elements in outdoor locations. Our powder coating solution ensures robust color retention for many years without fading. Custom colors, such as black, grey, desert tan or forest green, and galvanized finishes are available upon request. Non-standard powder coat colors or galvanized finishes may increase price and lead times. The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift eye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: All units are built in accordance to NFPA 70 (National Electric Code) and NRTL certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements. |
Larson Electronics 100A Portable Distribution Panel, 208Y/120 3-phase, (2) L6-30R, (10) 5-20R GFCI Receptacles MPD-CD5-RB2-BS.100AB-YT0YT-LZ-2.L09-10.N10-M1
Larson Electronics
- Weight:
- 0.00 LBS