Larson Electronics 1.2 kW Solar Equipment Tower - 30' Five-stage Mast - 7.5' Orange Trailer - 240aH Lithium-ion Battery Bank SPLT-1.2K-LM30-BC-R2

Made in the USA

The Larson Electronics SPLT-1.2K-LM30-BC-R2 Solar Equipment Tower provides a safe and effective way for operators to quickly deploy devices to elevations up to thirty feet. This mobile unit features a telescoping tower that folds over for easy transportation, a rotating boom that allows for 360¡ rotation and a removable mast head for storing equipment when not in use. This system features four, 300-watt solar panels and a 240 aH capacity lithium-ion battery bank. The entire assembly is mounted onto a powder coated orange, 7.5` single-axle trailer, allowing operators to transport this solar tower from location to location.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*

Solar Powered Tower: This solar equipment tower includes four solar panels, solar charging system, lithium-ion battery bank, battery charger and manual crank up mast mounted on a powder coated orange trailer with leveling jacks. The 1.2 kW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system delivers 24 volts for devices mounted atop the 30` telescoping mast.

The SPLT-1.2K-LM30-BC-R2 is supported by a lithium-ion battery pack, equating to 240aH battery capacity (240aH usable). A 120V battery charger provides flexibility during deployment, which allows operators to supply power to the batteries using an external power source. This feature is useful for fast turnaround projects, sustaining extended periods of illumination and remote sites that lack adequate exposure to sunlight.

Mast: This telescopingÊfive stage steel mast from Larson Electronics is designed to allow operators to quickly and safely deploy devices in locations where this equipment must be elevated to heights up to 30` for effective coverage. This light boom can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 13.5` for applications where a smaller footprint is required. The powder coated blue mast is extended to its full height using an included 1,000lb rated hand winch with 3/16" galvanized steel cable.

A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for equipment. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated for corrosion resistance and aesthetics.

The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These components can be extended 2` out from the side of the trailer for added stability. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised.

Solar Panel Assembly: This unit is comprised of four 300-watt solar panels, generating a total maximum output of 1.2 kW. The panels are mounted securely on a sliding assembly. During deployment, the top solar panels slide out to form a four-panel array for maximum exposure to sunlight. The panels are wired to the solar charger control box which manages the charging system. When in use, the four solar panels are angled at 45¡ to capture the intensity of the sun for optimized light intake.

Batteries: The solar unit contains a 240aH lithium-ion battery bank, which are more reliable than wet batteries due to no spillage. Compared to conventional SLA batteries, these units are 100% usable and lighter in weight. Over time, this results in lower operating and maintenance costs.

Battery Charger: This system comes with a 120V battery charger. Options for the type of battery charger includes: switching regulator, constant voltage with automatic switch to maintenance or trickle charge.

Component Control Center: All the electrical components are encapsulated in a NEMA 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The job box that contains the component control system includes locks for security purposes.

Trailer Assembly: The entire assembly is mounted to a 7.5` by 7`, single-axle trailer via six 1/2" anchor bolts. The two-wheel trailer has a steel tongue with a removable hitch pin for pivoting upwards during storage and independent suspension. An adjustable height coupler mount is available for accepting a 2" ball or 3" pintle ring coupler (with minimum capacity rating of 5,000 lbs). Safety chains with hooks and accessible tie-down points allow for easy hookup and towing. A rugged and waterproof job box is included, safely secured to the trailer. Four leveling jacks at the corners of the trailer allow operators to level the trailer, and provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations.

Applications: Remote work locations, construction sites, military bases, camping sites, outdoor events, security applications, emergency services, outdoor lighting, portable lighting and more.