Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe
MT-8200-63A Probe detects IntelliTone digital signals on active networks and 500 to 1,200 Hz analog signals on inactive networks to locate, trace, and isolate copper cabling
Key features
- Detects IntelliTone digital signals on active networks
- Includes: IntelliTone Pro 200 probe, RJ11 and RJ 45 patch cables, 9-V battery
- Identifies signals audibly and with 8 LEDs
- LED shows battery strength at power up and confirms signals
- Turns off automatically after 1 hour of inactivity
| General specifications | |
| Operating temperature | 32 ¡F to 104 ¡F (0 ¡C to 40 ¡C) |
| Storage temperature | -4 ¡F to +140¡F (-20 ¡C to ¡C) |
| Operating relative humidity (% RH without condensation) | 95 % (50 ¡F to 95 ¡F; 10 ¡C to 35 ¡C) 75 % (95 ¡F to 104 ¡F; 35 ¡C to 40 ¡C) Uncontrolled < 50 ¡F (< 10 ¡C) |
| Vibration | Random, 2 g, 5 Hz-500 Hz |
| Shock | 1 m drop test |
| Safety | EN 61010-1, Category: None |
| Altitude | 3000 m |
| EMC | EN 61326-1, FCC Part 15 B |
| Battery type and life | 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
| Applications | Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200. |
| Probe specifications | |
| Dimensions | 8.73 x 1.88 x 1.26 in (22.2 x 4.8 x 3.2 cm) |
| Display | (8) LED indicators, Sync LED indicator |
| Audio | IntelliTone: Microprocessor controlled audio files Analog: Detected toner signal |
| Control | Thumbwheel switch, volume control wheel |
| Tone detection | Detects IntelliTone digital signal for Locate, Isolate, and Cable Map Detects analog SmartTone signal (500-1200Hz) and other analog toners. |
| Toner interface | Main Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling. |
| Auto power down | Turns off automatically after 1 hour of inactivity |
