13.3X17 Steel Three Blade Right Hand Rotation PROP HUSTLER (31431712)

13.3X17 Steel Three Blade Right Hand Rotation PROP HUSTLER (31431712)

Turning Point Propellers

$424.68
(No reviews yet) Write a Review
SKU:
31431712
Weight:
11.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

The 13.3X17 Steel Three Blade Right Hand Rotation PROP HUSTLER (31431712) is a high-quality three-bladed thru hub exhaust propeller from the Hustler Series of Turning Point best suitable for 40hp to 150hp w/ 4-1/4-inch Gearcases. This propeller combines unique TurningPoint designs with high-quality 15-5 stainless steel alloys. With age, this metal becomes stiffer. Even at wide-open throttle, it gives maximum speed, a rapid holeshot, and secure handling, even in tight turns.

Key Features:

  • Stainless steel prop constructed of 15-5 stainless steel, which hardens and strengthens over time.
  • Higher rake angles increase boat lift and overall performance by tightening the vortex created by the propellers.
  • Aggressive rake and cupping improve handling and boat lift.
  • Progressive pitch angles that are tuned to accelerate and channel water to reduce slip and increase performance and fuel economy
  • Fine-tuned vents for a quick holeshot

Specifications:

  • SKU: 31431712
  • UPC: 652480200724
  • Weight: 11.00 LBS
  • Material: Stainless Steel
  • Pitch: 17”
  • Diameter: 13.3”
  • No. of Blades: 3
  • Rotation: Right Hand (RH)
  • Brand: Turning Point Propellers
  • Condition: New

Note:

  • This propeller requires the use of a Hub Kit for installation.

Engine Application

Evinrude/Johnson® 40-140 Horsepower 4.25” Gearcase


2 cyl: 50hp ('71-'74) / 45 to 55hp commercial;

3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial;

4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O. (includes E-TEC H.O.): 60, 90, 115hp;

E-TEC: 40, 50, 60, 65, 75hp / 20" shaft: 90, 115hp (not pontoon series), 130hp ('09-'10)4 stroke: 8hp ('96+), 9.9hp ('95-'01), 15hp ('95+)

Evinrude/Johnson® 60-70 Horsepower (4-Stroke) 4.25” Gearcase


4 stroke (Johnson): 60hp, 70hp

Force® 75-150 Horsepower (2-Stroke) 4.25” Gearcase


75hp ('99) / 90hp to 150hp ('95+)

Honda® 60-130 Horsepower (4-Stroke) 4.25" Gearcase


BF 4 Stroke: P60 / 75, 90 (‘99+) / 100, 115, 130hp. (not 115D)

Honda® 75-90 Horsepower (4-Stroke) 4.25" Gearcase


('95-'98): 75hp, 90hp

Mercury®, Mariner® 40-150 Horsepower 4.25" Gearcase


Note: Props Not Available for '77 & Older models.

(2 & 4 stroke) 40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp / 150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.)

FourStroke™ & SeaPro™ 4cyl: 40 to 75hp / OptiMax: 75, 90, 115, 125hp

Omc 1.6-3.Ol+ Horsepower 4.25" Gearcase


Cobra 400: 2.3 to 3.0L (‘78-’89) / Sea Drive: 1.6 to 1.8L

Parsun® 60-90 Horsepower 4.25” Gearcase


T60, T75, T85, T90

Suzuki® 60-140 Horsepower 4.25” Gearcase


DT 2 Stroke (‘89+): 75 to 140hp / DF 4 Stroke (‘98-’09): 60hp, 70hp

Tohatsu® Nissan® 60-115 Horsepower (2 & 4-Stroke) 4.25” Gearcase


60C, 70C, 70 (‘02-’09) / (Not BFT): 90 to 140hp / 115hp TLDI (‘14+)

Tohatsu® Nissan® 60-90 Horsepower (2 & 4-Stroke) 4.25” Gearcase


BFT ('14+): W60, 60, 75, 90hp

Yamaha 50-100 Horsepower 4.25” Gearcase


Note: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10.

High Thrust: FT50, FT60 / 2 stroke: 60 to 100hp / 4 stroke: 70, 75 (‘03-’16), 80, 90 (‘03-’16), 100hp

Yamaha 75-130 Horsepower 4.25” Gearcase


Note: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10.

2 stroke: 115 to 130hp / 4 stroke: 75 (‘17+), 90 (‘17+), 115hp

This product replaces:

    652480200724, EX2-1317, EX1-1317

Reviews

!