Sunled Industries EM-HBM Highbay Emergency Driver 25-40W/Up to 300W

Description

EM-HBMÊSeries

Highbay Emergency Driver

LED Emergency Battery Backup for Sunled round or linear highbay lights. This emergency power supply provides up to 90 minutes of backup power in the case of power loss and emergency.

25 or 40W 120-347VAC input emergency battery backup inverter with 170VDC output. This compact design is a contractor favorite featuring a quick and easy installation with a single junction both for mains and backup power

PRODUCT VARIATIONS
FEATURES
SELF DIAGNOSTIC
OPERATION
SPECIFICATIONS
APPLICATIONS
COMPLIANCE

Product Code

Example EM-HBM cat. 25.WW

ÊMODEL NO	WATTAGE	TEST SWITCH
EM-HBM	25Ê25W / 170VDCÊ	WW Wired
	Up to 150W Driver	WL 2.4GHz Remote
	40 40W / 170VDCÊ
	Up to 300W Driver

NOTES

_ The emergency driver is not compatible with non-dimmable fixtures when the driver wattages is less than the fixture wattage.Ê

Features

Single input mains services both normal and emergency output
Constant power output in emergency mode.
One piece design with IP65 steel housing
2 in 1 waterproof LED test switch and indicator light included, 2.4G wireless mode as optional
Evaluated to UL 924 requirements

Self Diagnostic

The integrated self-diagnostic circuitry will automatically conduct 1 monthly 30 second and annual 90 minute tests to verify proper emergency capability per life safety code requirements NFPA 101ÊLife Safety Code outlines the following schedule:

Monthly
During AC mode, the system conducts a 30s self discharge test of the emergency LED driver every 30 days and automatically restores to normal charging after full discharge

Annually

During AC mode, the system conducts a 90 minute self discharge test of the emergency led driver every 365 days and automatically restores to normal charging after 30 seconds discharge

Operation

Normal Supply
During normal AC supply conditions the LED driver load will operate as usual and emergency driver remains in charging mode

Emergency Mode

When AC power fails the driver automatically switches to emergency mode, keeping the LED load illuminated at a reduced lumen output for a minimum of 90 minutes. During this time, the indicator will flash slowly (light on for 2 seconds, off for 2 seconds). When AC power is restored, it will return to charging mode and the indicator light remains on

Specification

Input Voltage: 120-347VAC 50/60Hz
Input Power: 10W Max
Output Voltage: 170VDC
Output Current: 0.1A
Power Factor: 0.85
EMI (Radiated and Conducted): FCC Class A Charge and EM Modes
Surge protection: Meets ANSI/IEEE C62.41.2-2002
Approval: cUL Listed for Factory and Field Installation
Emergency Operation: 90min
Operating Temp: 23¡ to 131¡F
Battery: Li ION

Applications

Round and linear suspended highbays

Compliance

UL 924 Damp Location Listed
NFPA 101 Life Safety Code
NFPA 70 National Electrical Code