Lithonia Lighting 47768 Round Straight Steel RSS
Round straight steel general purpose pole for up to 30-foot mounting heights. Construction Shaft: Weldable grade, hot rolled, commercial-quality carbon steel tubing with minimum yield of 42,000 psi. Uniform wall thickness of .120". Shaft is one piece with a full-length, longitudinal, high-frequency electric resistance weld. Uniformly round in cross-section down length of shaft with no taper. Anchor base: Fabricated from hot-rolled carbon steel plate with 3/4" thickness conforming to ASTM A36. Base plate and shaft are circumferentially welded top and bottom. Anchor bolts: Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Bolts have an "L" bend on lower end and are galvanized a minimum of 12 inches on the threaded end per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers. Grounding: Provision located inside hand hole rim. Grounding hardware is not included (provided by others). Hand hole: Reinforced hand-hole rim located 18" above base. Includes cover with attachment screws. Hardware: All fasteners are high-strength galvanized or zinc-plated or stainless steel. Top cap: Removable top cap provided with drill-mount poles. Base cover: Includes full-base cover finished to match pole. Finish: Must specify finish. Other Check out POLESCENTRAL for additional resources and solutions. Refer to this link for Light Pole Replacement Parts
