Lithonia Lighting 47850 Square Straight Steel SSS
SSS Quick Ship Program: Lithonia Lighting¨ is now offering a quick program for SSS poles with over 1000 different configurations! Check out SSS Quick Ship spec sheet for available options and program rules. SSS Poles:Square straight steel general purpose pole for up to 39-foot mounting heights. Construction Shaft: Weldable grade, hot-rolled, commercial-quality carbon steel tubing with a minimum yield of 55,000 psi (11-gauge) or 50,000 psi (7-gauge). Uniform wall thickness of .125" or .188". Shaft is one piece with a full-length longitudinal high-frequency electric resistance weld. Uniformly square in cross-section with flat sides, small corner radii and excellent torsional qualities. Available shaft widths are 4, 5 and 6 inches. Anchor base: Fabricated from hot-rolled carbon steel plate conforming to ASTM A36 that meets or exceeds a minimum-yield strength of 36,000 psi. Base plate and shaft are circumferentially welded top and bottom. Anchor bolts: Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Bolts have an "L" bend on lower end and are galvanized a minimum of 12 inches on the threaded end per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers. Grounding: Provision located inside hand hole rim. Grounding hardware is not included (provided by others). Hand hole: Reinforced hand-hole rim having nominal dimensions of 3" x 5" for all shafts. Includes steel cover with attachment screws. Hardware: All fasteners are high-strength, galvanized or zinc-plated or stainless steel. Top cap: Removable top cap provided with drill-mount poles. Base cover: Includes full-base cover finished to match pole. Finish: Must specify finish. Other Check out POLESCENTRAL for additional resources and solutions. Refer to this link for Light Pole Replacement Parts
