Lithonia Lighting 47957 Cutoff Die-Cast Wall Pack, Glass Refractor TWRC
For building- and wall-mounted applications. Contact with a direct forceful spray of water during operation can result in glass breakage. Not recommended for car wash applications. Cannot be inverted. Construction Housing: Rugged, die-cast aluminum back housing and hinged doorframe. Castings are sealed with a one-piece gasket to inhibit the entrance of external contaminants. Finish is bronze polyester powder paint standard. Optics Tempered glass lens and one-piece anodized aluminum reflector provide IES cutoff distribution. Optional full cut-off visor available. Lens tilted 30¡ up horizontal. Electrical Ballast: All ballasts are 100% factory tested. HPS: High reactance, high power factor for 150W and below. Constant wattage autotransformer 250W and above. MH: 150W and below are standard with pulse-start ignitor technology. Super CWA Pulse Start ballasts, 88% efficient and EISA legislation compliant, are required for 151-400W (must order SCWA option). Socket: Porcelain, medium-base socket for TWR1C, mogul-base socket for TWR2C, with copper alloy nickel-plated screw shell and center contact. Installation Housing configured for mounting directly over a standard 4" outlet box or for surface wiring via any of three convenient 1/2" threaded conduit entry hubs (tops and sides).
