Hunza Lighting TCI-127413 TCI 25-50W, 350-1050MA DRIVER
Only available for USA market ¥ Multipower driver supplied with dip-switch for the selection of the output current ¥ IP20 independent driver, for indoor use (DC MAXI JOLLY US DALI).Ê ¥ Class II protection against electric shock for direct or indirect contact (DC MAXI JOLLY US DALI). ¥ Driver for built-in use (DC MAXI JOLLY US BI DALI). It can be used for lighting equipment in protection class I and II (DC MAXI JOLLY US BI DALI).Ê ¥ Active Power Factor Corrector. Analogical input (NTC) for thermal sensor connection. Auxiliary output 12 V max. 100 mA. ¥ Current regulation ±5 % including temperature variations. Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13).Ê ¥ Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (DC MAXI JOLLY US DALI).Ê ¥ Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads.Ê ¥ Thermal protection = C.5.a. Rated input voltage 110/240VAC Input frequency 50/60Hz DC Operation range DC 170 - 276 V (NO PUSH mode function) Power 1 - 60W iTHD ²10% Stand by power ² 0.5W Output current ripple ²3% Inrush current 10A 200µsec Standards CSA-C22.2 n¡ 107.1, CSA-C22.2 n¡ 250.13, EN 61000-3-2, EN 61000-3-3, EN Ê61347-1, EN 61347-2-13, EN 61547, EN 62384, EN 62386-101, EN 62386-102, EN Ê62386-207, UL 1012, UL 8750 Warranty 7 years ( *third party warranty) IP rating IP20
Only available for USA market ¥ Multipower driver supplied with dip-switch for the selection of the output current ¥ IP20 independent driver, for indoor use (DC MAXI JOLLY US DALI).Ê ¥ Class II protection against electric shock for direct or indirect contact (DC MAXI JOLLY US DALI). ¥ Driver for built-in use (DC MAXI JOLLY US BI DALI). It can be used for lighting equipment in protection class I and II (DC MAXI JOLLY US BI DALI).Ê ¥ Active Power Factor Corrector. Analogical input (NTC) for thermal sensor connection. Auxiliary output 12 V max. 100 mA. ¥ Current regulation ±5 % including temperature variations. Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13).Ê ¥ Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (DC MAXI JOLLY US DALI).Ê ¥ Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads.Ê ¥ Thermal protection = C.5.a. Rated input voltage 110/240VAC Input frequency 50/60Hz DC Operation range DC 170 - 276 V (NO PUSH mode function) Power 1 - 60W iTHD ²10% Stand by power ² 0.5W Output current ripple ²3% Inrush current 10A 200µsec Standards CSA-C22.2 n¡ 107.1, CSA-C22.2 n¡ 250.13, EN 61000-3-2, EN 61000-3-3, EN Ê61347-1, EN 61347-2-13, EN 61547, EN 62384, EN 62386-101, EN 62386-102, EN Ê62386-207, UL 1012, UL 8750 Warranty 7 years ( *third party warranty) IP rating IP20
