Xtralight EMX0036 or EMX0030 LED Emergency Light Self Diagnostic Testing
EMX0036 or EMX0030 The LED Emergency Light Self Diagnostic Testing (EMX0036) is a LED Emergency Light that can be used inside the entrances and exits of buildings. This energy-efficient unit provides greater efficiency of size (more light in a smaller package), using much less energy and lasting longer than standard incandescent, or even halogen lamps. Because itÕs so versatile, it can be surface mounted on the wall or ceiling. TheÊSelf Diagnostic Testing option continuously monitors the operating condition of the AC power, battery supply voltage, emergency lamp continually, and charging circuit. The purpose of this option is to provide visual signaling in response to a fault. The LED Emergency Light Self Diagnostic Testing Also available without the self-diagnostic testing mode EMX0030 Features Available with Self Diagnostic Testing as an option Long-lasting, efficient ultra-bright white LED lamp heads 1 watt (8 LEDs x 0.125 watt) per head High-performance chrome-plated metalized reflector and plastic lens for optimal light distribution Adjustable LED lamp heads provide optimal center-to-center spacing 5-year warranty on all electronics and housing (batteries pro-rated for five years) Applications Building Entrances Building Exits Housing Injection-molded, engineering-grade 5VA flame retardant, high-impact resistant, thermoplastic in white Mounting Surface mount via quick-connect back plate, which fits most standard junction boxes and snaps into place making internal electrical connections Conduit mount knockout on top of the housing and back plate Suitable for wall or ceiling mount Electrical Dual 120/277 voltage standard. Optional multi-tap 208/220/240 voltage available Charge rate/power ÒONÓ LED indicator light and push-to-test switch for mandated code compliance testing 3.6V long life, maintenance-free, rechargeable NiCd battery Internal solid-state transfer switch automatically connects the internal battery to LED lamp heads for minimum 90-minute emergency illumination Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours Approvals UL Listed for damp locations (0¡C Ð 50¡C) Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
Features:
Long-lasting, efficient ultra-bright white LED lamp heads 1 watt (8 LEDs x 0.125 watt) per head High-performance chrome-plated metalized reflector and plastic lens for optimal light distribution Adjustable LED lamp heads provide optimal center-to-center spacing 5-year warranty on all electronics and housing (batteries pro-rated for five years) Applications:
Building Entrances Building Exits Housing Injection-molded, engineering-grade 5VA flame retardant, high-impact resistant, thermoplastic in white Mounting Surface mount via quick-connect back plate, which fits most standard junction boxes and snaps into place making internal electrical connections Conduit mount knockout on top of the housing and back plate Suitable for wall or ceiling mount Electrical Dual 120/277 voltage standard. Optional multi-tap 208/220/240 voltage available Charge rate/power ÒONÓ LED indicator light and push-to-test switch for mandated code compliance testing 3.6V long life, maintenance-free, rechargeable NiCd battery Internal solid-state transfer switch automatically connects the internal battery to LED lamp heads for minimum 90-minute emergency illumination Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours Approvals UL Listed for damp locations (0¡C Ð 50¡C) Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
EMX0036 or EMX0030 The LED Emergency Light Self Diagnostic Testing (EMX0036) is a LED Emergency Light that can be used inside the entrances and exits of buildings. This energy-efficient unit provides greater efficiency of size (more light in a smaller package), using much less energy and lasting longer than standard incandescent, or even halogen lamps. Because itÕs so versatile, it can be surface mounted on the wall or ceiling. TheÊSelf Diagnostic Testing option continuously monitors the operating condition of the AC power, battery supply voltage, emergency lamp continually, and charging circuit. The purpose of this option is to provide visual signaling in response to a fault. The LED Emergency Light Self Diagnostic Testing Also available without the self-diagnostic testing mode EMX0030 Features Available with Self Diagnostic Testing as an option Long-lasting, efficient ultra-bright white LED lamp heads 1 watt (8 LEDs x 0.125 watt) per head High-performance chrome-plated metalized reflector and plastic lens for optimal light distribution Adjustable LED lamp heads provide optimal center-to-center spacing 5-year warranty on all electronics and housing (batteries pro-rated for five years) Applications Building Entrances Building Exits Housing Injection-molded, engineering-grade 5VA flame retardant, high-impact resistant, thermoplastic in white Mounting Surface mount via quick-connect back plate, which fits most standard junction boxes and snaps into place making internal electrical connections Conduit mount knockout on top of the housing and back plate Suitable for wall or ceiling mount Electrical Dual 120/277 voltage standard. Optional multi-tap 208/220/240 voltage available Charge rate/power ÒONÓ LED indicator light and push-to-test switch for mandated code compliance testing 3.6V long life, maintenance-free, rechargeable NiCd battery Internal solid-state transfer switch automatically connects the internal battery to LED lamp heads for minimum 90-minute emergency illumination Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours Approvals UL Listed for damp locations (0¡C Ð 50¡C) Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
Features:
Long-lasting, efficient ultra-bright white LED lamp heads 1 watt (8 LEDs x 0.125 watt) per head High-performance chrome-plated metalized reflector and plastic lens for optimal light distribution Adjustable LED lamp heads provide optimal center-to-center spacing 5-year warranty on all electronics and housing (batteries pro-rated for five years) Applications:
Building Entrances Building Exits Housing Injection-molded, engineering-grade 5VA flame retardant, high-impact resistant, thermoplastic in white Mounting Surface mount via quick-connect back plate, which fits most standard junction boxes and snaps into place making internal electrical connections Conduit mount knockout on top of the housing and back plate Suitable for wall or ceiling mount Electrical Dual 120/277 voltage standard. Optional multi-tap 208/220/240 voltage available Charge rate/power ÒONÓ LED indicator light and push-to-test switch for mandated code compliance testing 3.6V long life, maintenance-free, rechargeable NiCd battery Internal solid-state transfer switch automatically connects the internal battery to LED lamp heads for minimum 90-minute emergency illumination Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours Approvals UL Listed for damp locations (0¡C Ð 50¡C) Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
