| Field Adjustability |
| Field Adjustable | Field Adjustable Light Output:
130W/100W/65W (factory default 130W)Color temperature selectable 3000K, 4000K and 5000K (factory default 4000K) |
| Compliance |
| UL Listed | Suitable for wet locations |
| IP Rating | Ingress protection rating of IP65 for dust and water |
| DLC Listed | This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-10CCLB |
| Electrical |
| Driver | Constant Current, Class 1, 120-277V, 50/60 Hz130W: 120V: 1.10A 208V: 0.63A, 240V: 0.55A, 277V: 0.48A100W: 120V: 0.84A 208V: 0.48A, 240V: 0.42A, 277V: 0.37A65W: 120V: 0.55A 208V: 0.32A, 240V: 0.27A, 277V: 0.26A |
| Dimming Driver | Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%. |
| THD | 130W: 4.08% at 120V, 7.17% at 277V100W: 4.35% at 120V, 8.89% at 277V65W: 5.11% at 120V, 12.15% at 277V |
| Power Factor | 130W: 99.8% at 120V, 95.9% at 277V100W: 99.7% at 120V, 93.7% at 277V65W: 99.3% at 120V, 87% at 277V |
| Photocell | Integrated photocell included with on/off switch |
| Surge Protection | 6kV |
| Battery Backup | Battery backup will operate the fixture for 90 minutes if power fails. Wired for 120-277V. |
| Battery Backup Light Loss Factor | 0.08 |
| Performance |
| Lifespan | 100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations |
| Wattage Equivalency | 130W: Replaces up to 400W Metal Halide (MH) or 400W High Pressure Sodium (HPS)
100W: Replaces up to 400W Metal Halide (MH) or 310W High Pressure Sodium (HPS)
65W: Replaces up to 350W Metal Halide (MH) or 200W High Pressure Sodium (HPS) |
| LED Characteristics |
| LEDs | Long-life, high-efficacy, surface-mount LEDs |
| Color Uniformity | RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017. |
| Construction |
| Housing | Aluminum alloy |
| Lens | Prismatic, heat-resistant borosilicate glass |
| Reflector | Aluminum |
| Gaskets | High-temperature silicone |
| Cold Weather Starting | The minimum starting temperature is 1°C (33.8°F) |
| Maximum Ambient Temperature | Suitable for use in up to 60°C (140°F) |
| Green Technology | Mercury and UV free. RoHS-compliant components. |
| Finish | Formulated for high durability and long-lasting color |
| Installation |
| Mounting | Hinged wiring access and conduit entries on the back sides, top and bottom
make installation a snap |
| Sensor Settings |
| Microwave Motion Sensor | Microwave based technology occupancy sensor that automatically affect the operation of lighting equipment based upon detecting the presence or absence of people in a space. |
| Factory Settings | Brightness: 100%Hold Time: 20 MinutesDaylight: DisabledSensitivity: 100%Stand-by dimming level: 20%Stand-by time: 1 Minute |
| Remote Control | Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here. |
