Techlight 1317 Extruded Vertical Burn Canopy
The CVM Canopy light was designed for mid-level lighting under storefront awnings, I-Beam mounting, or any surface mount general lighting application. The welded seams provide a smooth constructed look that can be integrated into any design concept. Quick release hinges make access for maintenance easy. The fixture is constructed of .12Ó thick extruded aluminum with a welded seam. The hinged door frame is constructed of extruded aluminum with mitered corners to fit the lens. A Polyethylene Foam gasket is used for a watertight seal. A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request. High quality faceted aluminum reflector designed around a vertical lamp orientation. Flat prismatic lens standard. Provided with a 4KV pulse rated socket assembly. Fixtures are available with a 150W-400W Metal Halide lamp and ballast system. Each 60HZ CWA multi-tap, 480V, or Fluorescent ballast is pre-wired and installed for convenience. Permanently mounted via four .25Ó mounting holes and hardware pack provided by Techlight. Two (2) .88Ó conduit entries are provided.
The CVM Canopy light was designed for mid-level lighting under storefront awnings, I-Beam mounting, or any surface mount general lighting application. The welded seams provide a smooth constructed look that can be integrated into any design concept. Quick release hinges make access for maintenance easy. The fixture is constructed of .12Ó thick extruded aluminum with a welded seam. The hinged door frame is constructed of extruded aluminum with mitered corners to fit the lens. A Polyethylene Foam gasket is used for a watertight seal. A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request. High quality faceted aluminum reflector designed around a vertical lamp orientation. Flat prismatic lens standard. Provided with a 4KV pulse rated socket assembly. Fixtures are available with a 150W-400W Metal Halide lamp and ballast system. Each 60HZ CWA multi-tap, 480V, or Fluorescent ballast is pre-wired and installed for convenience. Permanently mounted via four .25Ó mounting holes and hardware pack provided by Techlight. Two (2) .88Ó conduit entries are provided.
