Techlight 1296 ADVantage LED Billboard Lighting Platform - 2 Module
The high performance luminaire is designed for billboard lighting applications. Long life, low maintenance, and consistent color rendering greatly reduce long term maintenance costs. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult will see continued benefit using the ADV Series. The heavy duty housing is constructed of die cast aluminum. The molded and contoured optical assemblies are sealed in place. A tempered glass lens and frame utilizes a silicone gasket for weather tight protection. A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request. Available in a 5000K Cool White (+/- 500K) color temperature. 70 CRI LEDÕs. Propagated with Cree XHP-50 LEDÕs or equivalent. Consult factory for the availability of addtional color temperature and CRI LEDÕs. High reflectance molded acrylic vacuum metallized optics were designed to work in tandem to efficiently distribute light over the face of a billboard or sign with minimal light spillage. Available with 90-300V 50/60 Hz Class II power supply. LEDÕs rated over 50,000 hours (TM21 Calculated L70 pending) at 25¡C ambient temperature with 700, 1050, and 1400mA operation. Lumen Maintenance >97% at 50K hrs. 347V and 480V input options available (remote enclosure may be necessary). Fixture provided with integral 10kV surge protection that meets IEEE C62.42.2-2002. Built-in Active PFC Function. LED power Supply conforms to UL1310 Class 2 and UL8750 standards and is IP67 rated for wet locations. Standard mounting option is designed to slipfit onto 1-1/4Ó Nominal Pipe (1.660Ó Dia.) or 1-1/2Ó square tubing. ADV splifitter clamps via u-clamp and/or set screws to either type of arm to provide correct offset. Custom mounting options may be available. Consult factory for additional information. Typical offset is 6Õ from the sign face and 3Õ below typical billboard. LED Power Supply listed for wet locations (IP67). Fixture is IP66 rated. ETL listed. Meets US and Canadian safety standards. -40¡C to 40¡C ambient operation. RoHS Compliant. The complete luminaire is covered by a 5-year limited warranty.
The high performance luminaire is designed for billboard lighting applications. Long life, low maintenance, and consistent color rendering greatly reduce long term maintenance costs. Areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult will see continued benefit using the ADV Series. The heavy duty housing is constructed of die cast aluminum. The molded and contoured optical assemblies are sealed in place. A tempered glass lens and frame utilizes a silicone gasket for weather tight protection. A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request. Available in a 5000K Cool White (+/- 500K) color temperature. 70 CRI LEDÕs. Propagated with Cree XHP-50 LEDÕs or equivalent. Consult factory for the availability of addtional color temperature and CRI LEDÕs. High reflectance molded acrylic vacuum metallized optics were designed to work in tandem to efficiently distribute light over the face of a billboard or sign with minimal light spillage. Available with 90-300V 50/60 Hz Class II power supply. LEDÕs rated over 50,000 hours (TM21 Calculated L70 pending) at 25¡C ambient temperature with 700, 1050, and 1400mA operation. Lumen Maintenance >97% at 50K hrs. 347V and 480V input options available (remote enclosure may be necessary). Fixture provided with integral 10kV surge protection that meets IEEE C62.42.2-2002. Built-in Active PFC Function. LED power Supply conforms to UL1310 Class 2 and UL8750 standards and is IP67 rated for wet locations. Standard mounting option is designed to slipfit onto 1-1/4Ó Nominal Pipe (1.660Ó Dia.) or 1-1/2Ó square tubing. ADV splifitter clamps via u-clamp and/or set screws to either type of arm to provide correct offset. Custom mounting options may be available. Consult factory for additional information. Typical offset is 6Õ from the sign face and 3Õ below typical billboard. LED Power Supply listed for wet locations (IP67). Fixture is IP66 rated. ETL listed. Meets US and Canadian safety standards. -40¡C to 40¡C ambient operation. RoHS Compliant. The complete luminaire is covered by a 5-year limited warranty.
