| Compliance | |
| UL Listed | Suitable for wet locations |
| Electrical | |
| Voltage | 120V AC 60Hz |
| Power Consumption | 1W |
| Surge Protection | Withstands up to 6000 volts |
| Wall Switch Manual Override | Two flip logic prevents activation by momentary power outages. Override resets to auto at dawn. No extra wiring needed. |
| RF Immunity | Circuits fully shielded for maximum radio frequency immunity |
| Switching Capacity | 8 amps, 1000W incandescent @ 120 volts |
| Sensor Settings | |
| Time Adjustment | 5 seconds to 12 minutes |
| Wide Sensitivity Control | Adjustable from 100% to 30% |
| Evening Timer | Keeps lights on for 1-8 hours after dusk. Then sensor is motion activated until dawn. |
| Set it and forget it | STL360's full coverage pattern reduces need for aiming and adjustment |
| Advanced Detection Logic | Minimizes false triggers |
| Photoelectric Control | Deactivates lights during daylight. Fully adjustable for 24 hour operation or custom applications. |
| Detection | Senses 180° and 360° down for Total Detection |
| LED Characteristics | |
| Scanning LEDs | 3 LEDs continually scan back-and-forth |
| Color Matched Lens | Dark lens with bronze units, white lens with white units |
| Construction | |
| Temperature Compensation | Sensitivity adjusted automatically for consistent detection in hot and cold ambient temperatures |
| Lens Masks | Customized press apply lens mask included to reduce coverage easily |
| Installation | |
| Mounting | CU4 plate allows the sensor to be mounted under a soffit |
STL360
RAB Lighting
- SKU:
- STL360
- UPC:
- 19813761206
- Availability:
- Usually ships within 1 week.
- Weight:
- 1.50 LBS
- wattage:
- 1000w
- color:
- Bronze
- Spec Sheet:
- Spec Sheet
- Instructions:
- Instructions
