| Field Adjustability |
| Field Adjustable | Field Adjustable Light Output:
2' x 4': 50W/40W/30W (factory default 40W)Color temperature selectable by 3500K, 4000K and 5000K (factory default 4000K) |
| Compliance |
| UL Listed | Suitable for damp locations |
| CCEA Compliant | Luminaire Requirements used in Environmental Air Space per the electrical code specification of the City of Chicago |
| IESNA LM-79 & LM-80 Testing | RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80. |
| Trade Agreements Act Compliant | This product is a product of Cambodia and a "designated country" end product that complies with the Trade Agreements Act |
| DLC Listed | This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-4LATM2 |
| Construction |
| IC Rated | Suitable for direct contact with insulation |
| Cold Weather Starting | The minimum starting temperature is -20°C (-4°F) |
| Maximum Ambient Temperature | Suitable for use in up to 40°C (104°F) |
| Lens | Frosted polystyrene |
| Housing | Plastic frame & galvanized steel back housing |
| Finish | White |
| Green Technology | Mercury and UV free. RoHS-compliant components. |
| LED Characteristics |
| LEDs | Long-life, high-efficacy, discrete, surface-mount LEDs |
| Performance |
| Lifespan | 50,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations |
| Wattage Equivalency | Equivalent to (3) F32T8 or (3) F28T5 |
| Electrical |
| Drivers | 30W: Constant Current, Class 2, 120-277V, 50/60 Hz, 120V: 0.25A, 208V: 0.15A, 240V: 0.13A, 277V: 0.11A40W: Constant Current, Class 2, 120-277V, 50/60 Hz, 120V: 0.34A, 208V: 0.20A, 240V: 0.17A, 277V: 0.15A50W: Constant Current, Class 2, 120-277V, 50/60 Hz, 120V: 0.42A, 208V: 0.25A, 240V: 0.21A, 277V: 0.18A |
| Dimming Driver | Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%. |
| THD | 7.89% at 120V, 6.23% at 277V |
| Power Factor | 99.32% at 120V, 95.1% at 277V |
| Sensor Settings |
| Capacitance Load | 400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| Relay | Zero-cross relay |
| Maximum Mounting Height | 16.4 ft |
| Customizable Detection Area | 10, 50, 75 or 100% |
| Time Delay | 5s, 30s, 1min, 5min, 10min, 20min, 30min |
| Cut Off Period | 0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level |
| Cut-Off Dimming level | 10, 20, 30, 50% |
| Cut-Off Power | Less than 1W |
| Daylight Threshold | About .2-5 fc for disabled |
| Sensor Principle | High Frequency |
| Microwave Frequency | 5.8GHz +/- 75MHz |
| Microwave Power | <0.2mW |
| Max Detection Range | 26 ft diameter at 16 ft mounting height |
| Detection Angle | About 30 to 150 degrees |
| Remote Control Accessory | Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here. |
| Installation |
| Mounting | Recessed into T-grid ceiling. Surface and recessed mounting kits available for drywall ceilings. |
