RAB Lighting SR2/PIR/E LED STRIP 2FT 19/14/10W 5/4/3K PIR SENS BAT B/U JBOX ADPT WH

Description

Field Adjustability
Field Adjustable	Field Adjustable Light Output: 19W/14W/10W (factory default 19W)Color temperature selectable by 5000K, 4000K and 3500K (factory default 4000K)
Compliance
UL Listed	Suitable for damp locations
IESNA LM-79 & LM-80 Testing	RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
DLC Listed	This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-BY8SM3 (Direct Linear Ambient Luminaires)DLC Product Code: S-DX6VKR (Stairwell and Passageway Luminaires)
LED Characteristics
LEDs	Long-life, high-efficacy, discrete, surface-mount LEDs
Color Uniformity	RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Color Consistency	4-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color
Performance
Lifespan	50,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Wattage Equivalency	19W: (1) F32T814W: (1) F32T810W: (1) F32T8
Electrical
Dimming Driver	Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD	6.33% at 120V, 12.02% at 277V
Power Factor	99.8% at 120V, 98.22% at 277V
Surge Protection	L-N 1KV, L/N-G 2KV
Battery Backup	Battery backup will operate the fixture for 90 minutes if power fails. Wired for 120-277V.
Battery Backup Light Loss Factor	19W: 0.22314W: 0.27610W: 0.42
Construction
Cold Weather Starting	The minimum starting temperature is 0°C (32°F)
Maximum Ambient Temperature	Suitable for use in up to 50°C (122°F)
Lens	Polycarbonate lens
Housing	Sheet metal
Green Technology	Mercury and UV free. RoHS-compliant components.
Finish	Formulated for high durability and long-lasting color
Installation
Mounting	Surface mounting standard. V-Hooks and Chain mounting available (ordered separately, SR VHOOK KIT).
Sensor Settings
Remote Control Accessory	Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here.
PIR Sensor Factory Settings	Brightness: 100%Hold Time: 1 MinuteDaylight: DisabledSenstivity: 100%Stand-By Dimming Level: 20%Stand-By Time: 1 Minute
Operating Voltage	12 ± 2V DC
Operating Current	30mA
Output	DIM 0-10V
Stand-By Power	<0.5W
Brightness	0%-100%/Quick setting: 70%/80%/90%/100%
Hold Time	10s/1min/10min/30min
Daylight Threshold	10Lux/30Lux/50Lux/100Lux/Disable
Lux On-Off	Adopted dual PD technology. H17-PIR is able to differenciate artificial light brightness from natural light after installed inside.
Stand-By Time	1min/30min/60min/+∞
Stand-By Dimming Level	10%/20%/30%/50%
Detection Angle	≤120° (wall mounted) 360° (ceiling mounted)
Control Line	Black White 12V+ ; Purple: DIM+ ; Pink GND/DIM-
Mounting Height	Max 6M (ceiling mounted)
Detection Range	Max 8m (ceiling mounted) Max 6m(wall mounted)
Operating Temperature	-30°C to 60°C (-22°F to 140°F)

SR2/PIR/E

Write a Review

RAB Lighting

SR2/PIR/E

Reviews

Get pricing for