RAB Lighting SEAL2/MVS/E LINER WASHDOWN FA 25/20/15W 3.5/4/5K BATT B/UP AND MVS INDOOR

Description

Compliance
UL Listed	Suitable for wet locations
UL 94	5VA flame classification
FCC	Complies with Part 15B of the FCC Rules
NSF	NSF Certified by Public Health and Safety
NEMA Rating	4X, protected against corrosion
IESNA LM-79 & LM-80 Testing	RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
IP Rating	Ingress protection rating of IP65 for dust and water
DLC Listed	This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-2WR1TU
Electrical
Driver	Constant Current, Class 2, 120-277V, 50/60Hz, 120V: 0.23A, 208V:0.13A, 240V: 0.12A, 277V 0.10A
Dimming Driver	Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD	3.55% at 120V, 4.59% at 277V
Power Factor	99.9% at 120V, 97.74% at 277V
Surge Protection	2.5kV
Battery Backup	Battery backup will operate the fixture for 90 minutes if power fails. Wired for 120-277V.
Battery Backup Light Loss Factor	0.232
LED Characteristics
LEDs	Long-life, high-efficacy, surface-mount LEDs
Color Uniformity	RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Performance
Lifespan	100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Wattage Equivalency	Equivalent to (2) F32T8 or (3) F17T8
Construction
IK Rating	IK08 Protected against 5 joules of impact. Equivalent to the impact of a 3.75 lbs. (1.7kg) mass dropped from 11.8" (300mm) above the impacted surface.
Housing	Impact-resistant polycarbonate* with stainless steel door clips. 1/2" NPS opening for conduit and bushing/cord entry. *Polycarbonate is affected by cleaning agents or other liquids containing partial solvents such as low molecular weight aldehydes and ethers, ketones, esters, aromatic hydrocarbons and perchlorinated hydrocarbons. Click here for a detailed list of damaging chemicals.
Lens	Diffuse polycarbonate lens for low glare and maximum protection
Reflector	Cold-rolled steel
Gaskets	High-temperature silicone gaskets
Cold Weather Starting	The minimum starting temperature is -40°C (-40°F)
Maximum Ambient Temperature	Suitable for use in up to 40°C (104°F)
Installation	Tether Cables are provided for easy installation. Quick connector may be used for quick and easy wiring.
Green Technology	Mercury and UV free. RoHS-compliant components.
Finish	Formulated for high durability and long-lasting color
Installation
Mounting	Quick-mount, stainless steel snap on brackets supplied for surface mounting. V-Hook brackets supplied standard for suspending the fixture.
Sensor Settings
Maxmium Mounting Height	19.68ft. (6m)
Operating Voltage	DC Input: 10.5-15V
Dimming Control	ON/OFF 0-10V Dimmable
Operating Temperature	-20°C to 70°C (-4°F to 158°F)
IP Rating	Ingress protection rating of IP65 for dust and water
Brightness	Factory Setting: 100%
Sensitivity Setting	25%/50%/75%/100% (Factory Setting: 50%)
Standby Period	0s/10s/30s/1min/5min/10min/30min/60min/+∞(Factory Setting: 1min)
Daylight	2Lux/10Lux/30Lux/50lLux/80Lux/120Lux/Disabled (Factory Setting: disabled)
Hold Time	5s/30s/1min/3min/5min/10min/20min/30min(Factory Setting: 20min)
Standby Dimming	10%20%/30%/50%(Factory Setting: 20%)
Detection Angle	30° to 150° without glass cover
Detection Distance	Radius 9.95-22.96ft (3-7m)
Remote Control Accessory	Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here.

SEAL2/MVS/E

Write a Review

RAB Lighting

SEAL2/MVS/E

Reviews

Get pricing for