RAB Lighting RAIL95W/D10/WS2 HIGHBAY 13IN 95W 5000K LED 120-277V DIM 20FT WS SENSOR WH INDOOR

Description

Compliance
UL Listed	Suitable for damp locations
IESNA LM-79 & LM-80 Testing	RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
Performance
Lifespan	100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
LED Characteristics
LEDs	Long-life, high-efficacy, surface-mount LEDs
Color Stability	LED Color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period
Color Uniformity	RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Construction
Maximum Ambient Temperature	Suitable for use 12 hours a day, 6 days a week in 60°C (140°F). Suitable for 24/7 use in up to 50°C (122°F).
Housing	Extruded aluminum
Lens	High-transmittance polystyrene
Reflector	Specular, high-reflectance aluminum with 95% reflectivity
Installation
Mounting	V hooks (chain by others)
Sensor Settings
Operating Voltage	120-277V
Power Consumption	1W
0-10V Sinking Current	50mA
Adjustable High and Low Modes	High: 0-10V; Low: off, 0-9.8V
Adjustable Time Delay	Amount of time in high mode with no motion before switching to low mode: 5 min., 1 -30 min.
Adjustable Cut Off Delay	Time in which the fixture will remain on low mode with no motion before turning off and waiting for new motion to turn on: None, 1 -60 min., 1 -5 hrs.
Adjustable Sensitivy	None, low, medium, maximum
Adjustable Setpoint	None, 1 to 250 fc, auto
Adjustable Ramp Up and Fade Down Times	1 to 60 sec
Operating Temperature	-40°F to 167°F (-40°C to +75°C)
Operating Humidity	20% to 90% noncondensing
Relay Life Rating	200,000 cycles (120/277VAC), 50,000 cycles (230VAC)
IP Rating	Ingress protection rating of IP66 for dust and water
UL Listed	Suitable for Wet Locations as factory installed
Handheld Wireless Configuration Tool	Adjust settings using handheld wireless configuration tool (catalog# WSREM). Only available with 0-10V dimming driver options. Handheld wireless configuration tool available here.
Multi Level Motion Sensor	/WS2 sensor options use state-of-the-art surface mount technology (SMT), just like cellular phones and beepers. SMT gives you more reliability, greater RFimmunity. This compact sensor that can fit neatly where others cannot. This sensor technology automatically affects the state of operation for lighting systems or individual luminaries based upon detecting the presence or absence of movement for both people as they exit/enter, or for the motion of moving vehicles within the sensors viewing area. The wide 180° viewing angle can detect movement along the entire side of a building with only one compact sensor. The hard lens is molded as part of the case, vandalproof, rainproof, bugproof and absolutely sealed. Sensor functions best when movement is across its detection pattern, not towards the sensor.
Electrical
Driver	One Driver, Class 2, Constant Current, 100-277VAC, 50-60Hz, 4kV, 1.1A,
THD	4.25% at 120V, 8.58% at 277V
Power Factor	99.9% at 120V, 96.5% at 277V

RAIL95W/D10/WS2

Write a Review

RAB Lighting

RAIL95W/D10/WS2

Reviews

Get pricing for