RAB Lighting PIR40/LCB LCB LOW VOLTAGE CONTROLLER WITH PIR SENSOR FOR HIGH BAY INDOOR CONTROLS

Description

Lightcloud
Lightcloud Blue	Lightcloud Blue is a Bluetooth Mesh wireless lighting control system that allows you to control RAB's various compatible devices. With RAB's patented Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system's reach.DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)Learn more at www.lightcloud.com.
Gateway Required	No
Communication Protocol	Bluetooth Mesh
Range	Indoor: Up to 60 feet between standard building materials. Building materials such as brick, concrete, and steel construction may require additional Lightcloud Blue devices to extend around an obstruction; Up to 200 feet clear line of sight. Outdoor: Up to 60 feet clear line of sight; Up to 18 feet around corners
Spacing Criteria	Lightcloud Blue devices should be placed within the specified range to communicate within the Bluetooth Mesh network.
Factory Reset	Method 1: Delete from App Open the app and access the device settings for the paired device. Be sure that the device is online and select 'Delete'. The device will flash on/off 5 times and return to full brightness. Method 2: Manual Power the device off and on 5x consecutively. Do not allow less than 4s to elapse from switching off to on. Do not allow more than 2s to elapse from switching on to off. The device will flash 3x, then reset to 100% brightness at default CCT. Method 3: Rapid Reset Tool The Rapid Reset process must be done by a professional electrician qualified by RAB. Reach out to your RAB sales manager to request a Rapid Reset Tool. The tool simply needs to be placed directly on the small Lightcloud Blue logo on the device for 2s or until the lamp/luminaire flashes 3x, then resets to 100% brightness at the default CCT.
Performance
Product Type	Low Voltage Controller+Sensor
L70 Lifespan	50,000-Hour LED lifespan based on IES LM-70 results
Electrical
Dimmable	Yes via the Lightcloud Blue mobile app and devices.This device will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
Input Voltage	12V
Operating Frequency	50/60Hz
Input Current @ 120V (mA)	30mA
Operating Temperature	-4°F to 140°F (-20°C to 60°C)
Sensor Settings
Sensor Connection Type	Pogo pin
Max Mounting Height	40 ft
Detection Range	40 ft diameter mounted at 40 ft
Sensor Technology	Passive Infrared (PIR)
Default Setting	Uncommissioned State: Motion Sensitivity: High Brightness when triggered : 100% Hold time: 20 minutes Standby to dim: 20% Standby time: 1 minute When vacant: OffDaylight: Disabled Commissioned State:Once pair, the sensor will default to disabled. Once enabled the following settings apply: Motion Sensitivity: High Brightness when triggered: Last on status Hold time: 20 minutes Standby to dim: 20% Standby time: 1 minute When vacant: Off Daylight: Disabled
Adjustable Sensor Settings?	Yes, using the Lightcloud Blue mobile app
Sensing Type	Occupancy or Vacancy (option to disable or set as an independent sensor)
Occupied Actions	On or On at a Dim Level
Vacant Actions	Off or On at a Dim Level
Occupancy Timeout	1 minute to 240 minutes
Daylight Sensing	The sensor will determine to trigger the light(s) on or not based on the daylight threshold level set in the Lightcloud Blue mobile app.
Daylight Threshold	150 lux to 1500 lux
Construction
Shape	Round
Finish	White
Enclosure Material	Plastic
Compliance
Environment	Suitable for use indoors and outdoors in dry, damp, or wet environments.
IP Rating	IP66
DLC NLC Listed	This product is on the Design Lights Consortium (DLC) Network Lighting Controls (NLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
Certification Model Number	PIR40/LCB
California Title 20 Compliant	No
California Title 24 JA8 Compliant	No
California Energy Commission (CEC) Status	Lawful for Sales in California
RoHS	Mercury and UV free. RoHS-compliant components.
FCC	Complies with Part 15 of the FCC Rules

PIR40/LCB

Write a Review

RAB Lighting

PIR40/LCB

Reviews

Get pricing for