PARK34-45W/120/PIR/BL

RAB Lighting

$179.00

(No reviews yet) Write a Review

SKU:: PARK34-45W/120/PIR/BL
UPC:: 192552000000
Availability:: Usually ships within 1 week.
Weight:: 2.10 LBS
Shipping:: Calculated at Checkout
Sell Sheet:: Sell Sheet
Spec Sheet:: Spec Sheet
Instructions:: Instructions
Watts:: 45W
Color Temp:: 5000K (Cool)
Lumens:: 5,629 lm
Efficacy:: 124.5
Color Accuracy:: 76 CRI
L70:: 100,000 Hours
Type:: Constant Current
V120:: 0.38A
Input Watts:: 45.2W

Sell Sheet:

Sell Sheet

Spec Sheet:

Spec Sheet

Instructions:

Instructions

Watts:

45W

Color Temp:

5000K (Cool)

Lumens:

5,629 lm

Efficacy:

124.5

Color Accuracy:

76 CRI

L70:

100,000 Hours

Type:

Constant Current

V120:

0.38A

Input Watts:

45.2W

Current Stock:

Quantity:

Adding to cart… The item has been added

Description

Compliance
UL Listed	Suitable for wet locations
IP Rating	Ingress protection rating of IP65 for dust and water
DLC Listed	This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-B1PUE0
LED Characteristics
LEDs	Long-life, high-efficacy, surface-mount LEDs
Electrical
Driver	Driver on board, Class B, 50/60 Hz, 120V: 0.38A
Dimming Driver	Integrated/embedded reverse Phase-Cut stepped luminaire-level dimming control. Ten discrete dimming steps plus off and full on are accomplished by modification of the voltage, current, and waveform to produce varying light output. Controller is remote located from fixture or junction box or can be located by the electrical panel.
THD	4.94% at 120V
Power Factor	99.4% at 120V
Surge Protection	3kA
Performance
Lifespan	100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Wattage Equivalency	Equivalent to 175W Metal Halide
Construction
Cold Weather Starting	The minimum starting temperature is -40°C (-40°F)
Maximum Ambient Temperature	Suitable for use in up to 40°C (104°F)
Sensor Settings
Maximum Mounting Height	13 ft
Voltage	5V
Dimming	Default factory setting: 30% dimming output
Operating Temperature	-20°C to 60°C (-4°F to 140°F)
Storage Temperature	20°C- 70°C (-40°F - 158°F)
Operating Humidity	5% - 93% without condensation
IP Rating	IP20
Warm Up Time	45s +/-5s
Standby (w)	<0.3W
Module Interaction	Wire AWG 22 (Grey Dim -, Purple Dim +, Yellow 5V DC)
Bi-Level	The sensor will dim the fixture down to 30% after a 20 minute vacancy delay, and then go full bright again when motion is detected.