| Compliance |
| UL Listed | Suitable for damp locations |
| IESNA LM-79 & LM-80 Testing | RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80. |
| DLC Listed | This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: PDFDWA1H |
| Performance |
| Lifespan | 100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations |
| LED Characteristics |
| LEDs | Multi-chip, high-output, long-life LEDs |
| Color Uniformity | RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017. |
| Construction |
| Operating Temperature | -20°C (-4°F) to 50°C (122°F) |
| Housing | 22 gauge die formed with white powder coat finish. Y Hooks included for easy chain or cable mounting. |
| Reflector | White painted, reflective, die formed painted steel |
| Lens | Polycarbonate lens |
| Cord & Plug | 8 ft cord and NEMA L5-15P twistlock plug for 120V only |
| Finish | Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color |
| Green Technology | Mercury and UV free. RoHS-compliant components. |
| Electrical |
| Driver | Class 2, Constant Current, 120-277V, 50/60 Hz, 120V: 2.25A, 208V: 1.30A, 240V: 1.12A, 277V: 1.0A |
| THD | 4.57% at 120V, 8.05% at 277V |
| Power Factor | 99.9% at 120V, 95.3% at 277V |
| Battery Backup | Battery backup will operate the fixture for 90 minutes if power fails. Wired for 120-277V. |
| Battery Backup Light Loss Factor | 0.093 |
| Surge Protection | 2.5kVFor areas prone to surges, upgrade to 10kV surge protection available |
| Installation |
| Mounting | V hooks and optional pendant mounting. AEROBAY® comes with two 42" chains. |
| Sensor Settings |
| Passive Infrared Occupancy and Daylight Sensor | PIR sensor with IR remote capability. High/Low bay passive infrared occupancy and daylight sensor. |
| UL Listed | Indoor use only |
| Operating Temperature | 32°F to 158°F (0°C to 70°C) |
| Operating Humidity | 5% to 96%, noncondensing |
| Line Voltage | LineVage for direct connection to load |
| Voltage | 120, 277, 347V, 60Hz or 230V, single phase, 50Hz operation |
| Power Consumption | 0.2W |
| Maximum Versatility | Adjustable time delay and sensitivityAdjustable hold-off daylighting level |
| Weight | 6.4 oz (181 g) |
| Hardware | UL listed snap-in mounting hardware |
| Mounting | Easy mounting using knockout at end of linear high bay luminaire |
| Lens | Lens (attached) designed for mounting heights from 15 to 40 ft |
| Rotatable Mask | Snap-on rotatable mask for aisleway applications (included) |
| Coverage | Covers a 100-foot diameter area whem mounted at height of 40 ft |
| Factory Default | 15 minutes time delayMax sensitivity300 footcandle light level |
| Handheld Wireless Configuration Tool | Adjust settings using handheld wireless configuration tool (catalog# WSREM). Only available with 0-10V dimming driver options. Handheld wireless configuration tool available here. |
